Fs:loads Of Fd Performance Parts
10-03-2003, 01:24 PM
#1
Member
Thread Starter
Join Date: Aug 2003
Posts: 68
Shipping is not included in prices.
Price Item
$300 HKS Twinpower & harness with a new set of gapable 10's plugs
$100 FD Coils & Taylor wires+new low tension harness
$250 Profec B
$300 CF hood M-speed knockoff
$350 Techedge Wideband 1.5+sensor+bung
$1350 PFC+Datalogit+GM 3-bar MAP sensor
$100 Greddy Pulley kit+Belt
$50 Starter
$50 Alternator
$100 SS Midpipe
$350 SS M2 2tip exhaust
$350 RX7.com exhaust + silencer
$50 550pri injectors+rail
$350 Stock wheels
$300 Koyo radiator
$50 Walbro 255 high press/high vol in-tank pump
$150 Short shifter & CF Mazda speed shift ****
$1300 Greddy 3-row front mount with Greddy type R BOV already on the pipe, & a Greddy elbow cut & ported to match the 3" piping.
$300 Mazda speed PowerPlant Frame (less then 10K miles)
$150 stock PPF no cracks
$100 Autometer boost gauge & steering column pod
$3300 GT3540 kit & K&N filter this is the kit with the ceramic coated DP WG routed back into DP. Turbo is being repaired at Majestic in Tx next week.
$1100 Fuel system -Aeromotive A1000 pump & filter+2 756cc injectors+2 1680cc injectors all with resistors & harnesses+FPR& DEFI fuel pressure gauge and keiths rails. I have a bracket to mount the FPR where the OEM turbo control solenoids mount (UIM) and all fittings including dist Y & socketless hoses.
$700 Engine core. Streetported, all 3 rear ceramic 2mm apex seals good, front shot!+ACTPressure plate +Clutchnet sprung puck disk and 17LBS flywheel (only7K miles on new housing & I'm sure the front housing is shot & possibly the rotor as well)
PM, reply, or email me rx712psi@yahoo.com
ebay listing will follow for the parts that don't sell quickly.
Price Item
$300 HKS Twinpower & harness with a new set of gapable 10's plugs
$100 FD Coils & Taylor wires+new low tension harness
$250 Profec B
$300 CF hood M-speed knockoff
$350 Techedge Wideband 1.5+sensor+bung
$1350 PFC+Datalogit+GM 3-bar MAP sensor
$100 Greddy Pulley kit+Belt
$50 Starter
$50 Alternator
$100 SS Midpipe
$350 SS M2 2tip exhaust
$350 RX7.com exhaust + silencer
$50 550pri injectors+rail
$350 Stock wheels
$300 Koyo radiator
$50 Walbro 255 high press/high vol in-tank pump
$150 Short shifter & CF Mazda speed shift ****
$1300 Greddy 3-row front mount with Greddy type R BOV already on the pipe, & a Greddy elbow cut & ported to match the 3" piping.
$300 Mazda speed PowerPlant Frame (less then 10K miles)
$150 stock PPF no cracks
$100 Autometer boost gauge & steering column pod
$3300 GT3540 kit & K&N filter this is the kit with the ceramic coated DP WG routed back into DP. Turbo is being repaired at Majestic in Tx next week.
$1100 Fuel system -Aeromotive A1000 pump & filter+2 756cc injectors+2 1680cc injectors all with resistors & harnesses+FPR& DEFI fuel pressure gauge and keiths rails. I have a bracket to mount the FPR where the OEM turbo control solenoids mount (UIM) and all fittings including dist Y & socketless hoses.
$700 Engine core. Streetported, all 3 rear ceramic 2mm apex seals good, front shot!+ACTPressure plate +Clutchnet sprung puck disk and 17LBS flywheel (only7K miles on new housing & I'm sure the front housing is shot & possibly the rotor as well)
PM, reply, or email me rx712psi@yahoo.com
ebay listing will follow for the parts that don't sell quickly.
10-03-2003, 01:50 PM
#4
Member
Thread Starter
Join Date: Aug 2003
Posts: 68
Originally Posted by rx7machine' date='Oct 3 2003, 10:36 AM
What name brand is the SS midpipe? Is it used or new? Any pics?
Eric
Eric
I may be able to get pics of it this weekend.
10-03-2003, 05:52 PM
#9
Member
Thread Starter
Join Date: Aug 2003
Posts: 68
Originally Posted by rfreeman27' date='Oct 3 2003, 12:33 PM
would you sell the datalogit alone?
Also, pics of the hood?
Also, pics of the hood?
The 3-bar map sensor has the harness, & I've also got an engine torque brace for $100
There is a guy coming up from Gainsville this weekend to look at the hood, but I can snap some pics as soon as I get away from the pc.