Shipping is not included in prices.

Price Item

$300 HKS Twinpower & harness with a new set of gapable 10's plugs

$100 FD Coils & Taylor wires+new low tension harness

$250 Profec B

$300 CF hood M-speed knockoff

$350 Techedge Wideband 1.5+sensor+bung

$1350 PFC+Datalogit+GM 3-bar MAP sensor

$100 Greddy Pulley kit+Belt

$50 Starter

$50 Alternator

$100 SS Midpipe

$350 SS M2 2tip exhaust

$350 RX7.com exhaust + silencer

$50 550pri injectors+rail

$350 Stock wheels

$300 Koyo radiator

$50 Walbro 255 high press/high vol in-tank pump

$150 Short shifter & CF Mazda speed shift knob

$1300 Greddy 3-row front mount with Greddy type R BOV already on the pipe, & a Greddy elbow cut & ported to match the 3" piping.



$300 Mazda speed PowerPlant Frame (less then 10K miles)

$150 stock PPF no cracks

$100 Autometer boost gauge & steering column pod

$3300 GT3540 kit & K&N filter this is the kit with the ceramic coated DP WG routed back into DP. Turbo is being repaired at Majestic in Tx next week.



$1100 Fuel system -Aeromotive A1000 pump & filter+2 756cc injectors+2 1680cc injectors all with resistors & harnesses+FPR& DEFI fuel pressure gauge and keiths rails. I have a bracket to mount the FPR where the OEM turbo control solenoids mount (UIM) and all fittings including dist Y & socketless hoses.



$700 Engine core. Streetported, all 3 rear ceramic 2mm apex seals good, front shot!+ACTPressure plate +Clutchnet sprung puck disk and 17LBS flywheel (only7K miles on new housing & I'm sure the front housing is shot & possibly the rotor as well)



PM, reply, or email me rx712psi@yahoo.com

ebay listing will follow for the parts that don't sell quickly.

got dibs on walbro pump. send me a pm

What name brand is the SS midpipe? Is it used or new? Any pics?

Eric

I think it may have been a Pettit. It fits great, is used & is stainless so these things are hard to mess up!



I may be able to get pics of it this weekend.

interested in the mazda speed ppf. please pm me more info about it.

CF shift knob is MINE..how much?



Also steering column pod w/out gauge. How much?

I'd rather keep those parts together.

would you sell the datalogit alone?



Also, pics of the hood?

Yes I can do that as I already have sombody wanting to send me money for just the PFC. (and others interested in just the datalogit)



The 3-bar map sensor has the harness, & I've also got an engine torque brace for $100



There is a guy coming up from Gainsville this weekend to look at the hood, but I can snap some pics as soon as I get away from the pc. https://www.nopistons.com/forums/pub...IR#>/smile.png

The twinpower is sold.