|
Oh OK. I thought you were referring to the GLC. The 7's mount will fit for what you are thinking of doing.
|
Will the RX2 mount be able to be drilled to take this engine from my rx7 and drop it in the glc if i get one?
I might drop this SE engine in a GLC if I don't buy this Series 5 GXL I'm looking at.Then doing a turbo swap on the Rx7 using the SE cover OMP pick-up and pan. thanks |
I know all about first gen 7 swaps I just want to learn about the GLC swap.It sounds as easy as it was putting this engine in my car.Providing theres enough mounting metal to make the Rx2 mount hold the SE engine in it see as my 13b is 10mm longer then a 12a.
|
The 13B will fit with no problem. It will bolt up in the same position as the 12A. The difference in length will be offset at the tranny mount which, infact, is not much.
|
Originally Posted by spiceisler' date='Jan 16 2003, 05:30 AM
The 13B will fit with no problem. It will bolt up in the same position as the 12A. The difference in length will be offset at the tranny mount which, infact, is not much.
|
ON the NOS fed 12a where did you run the injector too?I'm getting a NOS kit in then next week or so and I'm thinking of running it thru the ACV block off.Wheres that one run thru?
|
That's an idea though. On that particular 12A the intake plenum was drilled and tapped on the engine side. Through the AVC block off seems easier...........hmmm, why didn't I think of that. https://www.nopistons.com/forums/pub...#>/BURNOUT.gif
|
Originally Posted by spiceisler' date='Jan 14 2003, 09:43 AM
It is but you got to use the 12A front cover. The only issue I see is the relocation of the turbo. There is not enough room between the strut tower and the motor for the turbo and the manifold. You might have to do a custom setup and locate the turbo where the battery originally would be.
|
The GLC is just shy of 2100, if I can recall right. I have an old title at home I'll check that for you.
|
Cool. I need to drop this driveline in something and the GLC's wieght is very nice.https://www.nopistons.com/forums/pub...#>/biggrin.png Trying to find one here in good shape is like trying to find a rust free first gen 7 tho.I should have bought the GLC I saw last fall, damn!
|
| All times are GMT -5. The time now is 10:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands