Lada Rotary Race Car
#1
This Vaz Lada 2110 car was prepared for Russian Supertouring Cars Championship or RSTCC for a few years at the end of 90's. The car was prepared by the works team and raced by works driver Boris Maslov. It used a Lada rotary engine like that fitted in the special version of VAZ cars for the Russian police and KGB.
Technical specification Length - 4250 Width - 1780 Height - 1350 Wheelbase - 2550 Front wheel track - 1530 Rear wheel track - 1490
Full mass - 960 (kg) Top speed - 240 km/h (150 mph) 0-100 km/h (0-62 mph) - 6sec
Engine Type - Rotary VAZ 415 # of Sections (rotors) - 2 Displacement - 1308 sq2 (ccs) Compression ratio - 9,4 Power, hp/rpm - 190/8500 Torque, Nm/rpm - 196.2/4500 Fuel feed - Injection, controlled by Janvar 4-1 ECU
Gearbox Gears - 6 Type - Dogbox
The 2004 spec 2110 race car which has '2.0 GTI' on the back uses a G.M. Opel 2 litre piston engine.
Technical specification Length - 4250 Width - 1780 Height - 1350 Wheelbase - 2550 Front wheel track - 1530 Rear wheel track - 1490
Full mass - 960 (kg) Top speed - 240 km/h (150 mph) 0-100 km/h (0-62 mph) - 6sec
Engine Type - Rotary VAZ 415 # of Sections (rotors) - 2 Displacement - 1308 sq2 (ccs) Compression ratio - 9,4 Power, hp/rpm - 190/8500 Torque, Nm/rpm - 196.2/4500 Fuel feed - Injection, controlled by Janvar 4-1 ECU
Gearbox Gears - 6 Type - Dogbox
The 2004 spec 2110 race car which has '2.0 GTI' on the back uses a G.M. Opel 2 litre piston engine.
#3
Lada have a fairly long history using rotary engines IIRC.
Just did a quick google and found this: http://cp_www.tripod.com/rotary/pg07.htm
Mark
Just did a quick google and found this: http://cp_www.tripod.com/rotary/pg07.htm
Mark
#4
Originally Posted by mazdadrifter' date='Dec 18 2004, 11:18 AM
#5
Originally Posted by inanimate_object' date='Dec 18 2004, 03:50 PM
Lada have a fairly long history using rotary engines IIRC.
Just did a quick google and found this: http://cp_www.tripod.com/rotary/pg07.htm
Mark
Just did a quick google and found this: http://cp_www.tripod.com/rotary/pg07.htm
Mark
Originally Posted by Wankeller1' date='Dec 18 2004, 06:03 PM
LOL that's awesome. You get so caught up in mazda's rendition of the rotary it's refreshing to see new ideas and layouts of essentially the same motor. We need a "non-Mazda" rotary section.
#6
Originally Posted by mazdadrifter' date='Dec 19 2004, 12:54 AM
LOL that's awesome. You get so caught up in mazda's rendition of the rotary it's refreshing to see new ideas and layouts of essentially the same motor. We need a "non-Mazda" rotary section.
Mark
#7
Originally Posted by mazdadrifter' date='Dec 18 2004, 03:54 PM
LOL that's awesome. You get so caught up in mazda's rendition of the rotary
#10
Originally Posted by 85turboGSLse' date='Jan 27 2005, 09:13 AM
Mark
Thread
Thread Starter
Forum
Replies
Last Post
agershon
RX-7 & RX-8 For Sale
6
03-16-2015 10:02 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)