When Disaster Strikes
02-13-2004, 07:55 PM
#44
Senior Member
Join Date: Aug 2003
Location: Portland Oregon
Posts: 448
Nice, this is the motor in which you are planning the aux port plate? I am thinking about doing the same thing on my 13B, only porting the secondary and aux ports and giving both set of ports there own actuator. I just wonder if the car will run good enough on teh primaries to get it through Smog sniffer tests.
Sweet porting job by the way.
Sweet porting job by the way.
02-14-2004, 09:58 AM
#45
Senior Member
Thread Starter
Join Date: Oct 2003
Location: Fort Lewis Washington
Posts: 705
I am waiting for the RB 6 port intake manifold. Once I get it I will decide wether or not the plate is needed. If it is not I am installing the butterflies on the intake runner like the Euro spec 6 port.
Speaking of euro spec... Who has the Part Number for the side housings.
No sleeves means a shallower aux port without the flat wall at the back.
Speaking of euro spec... Who has the Part Number for the side housings.
No sleeves means a shallower aux port without the flat wall at the back.
