Various custom parts fabricated for FD3S
Thread Starter
Member
Joined: Oct 2002
Posts: 90
From: Utopia
Fab'd the alloy battery tie down bracket and fitting 3 CDI box's (held by battery bracket posts), wiring layout in progress (lots of wires haha)
Started fabrication of the air box to turbo WI chamber, twin 3" feeds to 4" on front of turbo
Well here it is, a tad over engineered!!! can be used as a third engine mount!!! (its not so bad weight is under 1kg) but its rock solid, holds coils perfectly and is very simple, each rotor coils set is modular and comes off with one cap head bolt
I probably screwed around for weeks on and off thinking how to do it and this way worked out best, lots of welding and making different jigs *fiddly stuff* especially the spacers for the coils, but that's how it goes lol
Started fabrication of the air box to turbo WI chamber, twin 3" feeds to 4" on front of turbo
Well here it is, a tad over engineered!!! can be used as a third engine mount!!! (its not so bad weight is under 1kg) but its rock solid, holds coils perfectly and is very simple, each rotor coils set is modular and comes off with one cap head bolt
I probably screwed around for weeks on and off thinking how to do it and this way worked out best, lots of welding and making different jigs *fiddly stuff* especially the spacers for the coils, but that's how it goes lol
Thread Starter
Member
Joined: Oct 2002
Posts: 90
From: Utopia
Tomorrow wire up the 3 CDI boxes and all that is done 
Totally sealed ! no radiant heat will go up to intake manifold !
Earlier stages
Making Turbine exit pipe for my SP.
And pic of my basic welding set up *hobbo set up lol*
Pretty happy with end result, its what I always wanted in my own car and any turbo should be like this IMHO, no more excuses of "too hot bro, cant boost it"
Totally sealed ! no radiant heat will go up to intake manifold !
Earlier stages
Making Turbine exit pipe for my SP.
And pic of my basic welding set up *hobbo set up lol*
Pretty happy with end result, its what I always wanted in my own car and any turbo should be like this IMHO, no more excuses of "too hot bro, cant boost it"
Thread Starter
Member
Joined: Oct 2002
Posts: 90
From: Utopia
Finished AF sensor placement, also EBP sensor fitted too, all fiddly stuff really to get it to fit and be serviceable. Also have started work on decent SS304 heat shield (not finished yet), and fabricated the oil drain and inlet feed.
Thread Starter
Member
Joined: Oct 2002
Posts: 90
From: Utopia
Well here is the completed dump pipe with all heat shields in place, these are designed to be loose and have some air circulation to stop pipe fatigue in circuit racing applications, I will have a pipe feed of air going to underside of manifold as well. Most all radiant heat will be stopped going into inlet manifold and into other components and engine bay in general as you can see from angled shots. All shields are removable too (made these myself).
