Got an update for you guys. Have a peek at the recent logs and the videos.



http://forum.teamfc3s.org/showpost.php?p=5...p;postcount=261



B

 

damn i cant wait till im abled to do that

 

why was the TPS reading only shows 50% for a duration of 1.5 secs after your initial WOT? Does your Boost controller not working and you had to modulate your throttle to maintain the boost or you're just running half throttle on those pulls?



If that is the case, how could the a/f ratio be accurate since you're restricting air flow?

 

Brian

I asked once before but here goes again why are the datalogs not to redline? It would be nice to show a datalog of a full run from at least 2nd to the end of 4th gear at full load and rpm.

 

When i was tuning with varoius mixtures on the road i was loading the motor up through 2nd 3rd 4th and 5th to get accurate egts and figures ( to ensure i knew what was going on ) I the end i wound up with what i would concider a nice rounded afr with around 22 deg on a stock port.



Scott