Shimming Of Front Oil Pressure Regulator?
03-19-2004, 09:47 AM
#1
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Massachusetts
Posts: 857
I was reading the FAQ on the e-shaft oil mod and I would like to do a variation of it with my new motor. Basically I would like to increase my oil pressure using an FD rear regulator, but I will have to shim my front regulator and I don't know how many and what size washers I will need. Can somebody please give me the specs for shimming the front pressure regulator for 110 psi? Thanks. BTW I have a 90 TII and will be running the 13BT it comes with with an aggressive street port.
03-19-2004, 11:25 AM
#2
Member
Join Date: Jun 2003
Location: Helena, AL
Posts: 96
According to MazdaMotorsports a 1/8" shim is all that is required. Here is the text from their description of their "Competition Oil Pressure Regulator"
With the use of a high capacity oil pump, the competition regulator allows oil pressure in the system to reach 105-115 psi. It is also recommended to shim the from pressure regulator 1/8' to ensure it does not limit system pressure.
03-22-2004, 07:21 AM
#7
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Massachusetts
Posts: 857
So then what you're telling me is that I don't hve to shim my front regulator? The reason I ask is becuase I think it said in the FAQ that you had to so that it wouldn't bypass to early.
04-02-2004, 05:43 PM
#8
Junior Member
Join Date: Feb 2003
Location: Toronto Corporate, Canada
Posts: 28
Coincidently, this Is what I am going through right now. With a recently purchased RB Street Pressure Regulator, I called RB to ask bout the shimming of the Front Control Pressure Regulator just 2hrs ago. They said, with the addition of the RB Pressure Regulator, their Is no need to shim the front one. Good enough for me.
