S1 Rx7 Rally Car
Thread Starter
Junior Member
Joined: Aug 2003
Posts: 1
I have a s1 Rx7 with a 13b pp with carbon seals looking for more power .
It has standed rotors (weight wise) and with 46mm x 50 inlet port.
Q . how big can u go with the inlet port size with out the seals jumping out the port. and lighting the rotors and weights??
It has standed rotors (weight wise) and with 46mm x 50 inlet port.
Q . how big can u go with the inlet port size with out the seals jumping out the port. and lighting the rotors and weights??
Member
Joined: Feb 2003
Posts: 49
From: Columbus, OH
I know some 12a PP race engines use a 2.25'' hole in the housing, with a 2'' I.D. pipe in the port. Since that's on a 12a, you might be able to run a little bigger port on the 13b, not sure if the apex seals would bend in the middle with a bigger port or not.
Thread
Thread Starter
Forum
Replies
Last Post
wavemux
Northeast
0
Jun 22, 2011 08:35 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)