rebuilder in the midwest?
05-03-2007, 02:28 PM
#1
Senior Member
Thread Starter
Join Date: Jun 2006
Posts: 370
Im looking for someone who can rebuild my engine and who is able to do a street port on it, and help me reassemble it together minus the turbos of course.. if anyone is in the midwest and can help me out send me a PM and lets schedule something out! I have half the accessorys already tore off the engine.. and I already have the atkins full rebuild kit, I would like to assemble it also back with the intake and all,
So all i will have to do is bolt the turbos back on and drop it in my car and boom!! anyone out there??
This is my first rebuild so im nervous with the rotary engine!
its a 13B-rew also
So all i will have to do is bolt the turbos back on and drop it in my car and boom!! anyone out there??
This is my first rebuild so im nervous with the rotary engine!
its a 13B-rew also
05-03-2007, 04:13 PM
#2
Senior Member
Join Date: Nov 2002
Location: Wi nøt trei a høliday in Sweden this yër?
Posts: 1,113
Atkins' rebuild video is very straightforward and easy to follow. Theyeven have it available on DVD now. It's a good investment, plus it will help you learn more about the engine.
http://www.atkinsrotary.com/store/customer...cat=0&page=
http://www.atkinsrotary.com/store/customer...cat=0&page=
05-04-2007, 09:22 AM
#3
Senior Member
Thread Starter
Join Date: Jun 2006
Posts: 370
Originally Posted by JimmyJimboJet' post='870339' date='May 3 2007, 04:13 PM
Atkins' rebuild video is very straightforward and easy to follow. Theyeven have it available on DVD now. It's a good investment, plus it will help you learn more about the engine.
http://www.atkinsrotary.com/store/customer...cat=0&page=
I actually already have that video, but still id like someone there who has done it before with me just to be safe.
Also Im looking for someone who can port my housings and irons for me also!
05-04-2007, 12:38 PM
#4
Senior Member
Thread Starter
Join Date: Jun 2006
Posts: 370
ill pay for the gas used, and throw in a nice dinner and plenty of beer!! 
common guys someone out there has to be familuar with rebuilding rotary motors in the midwest!
heck ill make it easier ill still offer the dinner and beer, and ill drive to you with the engine and parts! if your in the midwest!
heck ill make it easier ill still offer the dinner and beer, and ill drive to you with the engine and parts! if your in the midwest!
05-05-2007, 12:02 PM
#6
Senior Member
Thread Starter
Join Date: Jun 2006
Posts: 370
Originally Posted by WNT2CREALPAIN' post='870497' date='May 5 2007, 07:48 AM
Where in the midwest are you at?!
I can ask matt for ya. He's helping me rebuild my motor in late june.
I think i just found someone but im in moline illinois
05-22-2007, 12:59 PM
#7
Senior Member
Thread Starter
Join Date: Jun 2006
Posts: 370
fc3sboy1 is currently rebuilding my motor! hes very knowledgeable in these motors and i got to see one of their race cars also! I go back and pick up my motor this weekend! Can't wait to put it back in my car and get it on the road!! thanks again everyone for your help on helping me out! lets just pray that i get this engine back in my car and get it back on the road within the next few weeks!!!!
05-29-2007, 07:45 AM
#8
Senior Member
Thread Starter
Join Date: Jun 2006
Posts: 370
fc3sboy1 finished my motor this weekend, and I wanted to say what a guy!!! he is very informative and helped me everystep of the way!! we ran into small issues and he figured it out in no time!! plus we had a blast up there anyways!! made for a long ride home!! ha ha But I wanted to let everyone know that he was excellent and i would refer him to anyone!! Thanks FC!!! Plus a few friends of mine up here may be getting ahold of you on there rx-7 stuff...
Thread
Thread Starter
Forum
Replies
Last Post
VROOOOOMZOOM
Northwest
5
02-17-2006 04:48 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)