Porting Templates
Senior Member
Joined: Mar 2004
Posts: 558
From: MD
Thread Starter
Junior Member
Joined: Jun 2007
Posts: 3
Originally Posted by RotaryVillain' post='874883' date='Jun 12 2007, 03:43 PM
thanks for the info, ill have do some legwork to see which one is best for me
Fabricator
Joined: Jan 2004
Posts: 1,322
From: Central Ohio (Hebron) Zephyrhills Fla.
Originally Posted by e dogg' post='874895' date='Jun 12 2007, 06:00 PM
thanks for the info, ill have do some legwork to see which one is best for me
Read all of the tech articles on www.yawpower.com
Become fully informed.
Lynn E. Hanover
Picture is of a bridgeported 12A iron but shows what you will be looking for. Closing line is the same as late closing the intake valve on a piston engine. The later the closing point the poorer the bottom end.
Fabricator
Joined: Jan 2004
Posts: 1,322
From: Central Ohio (Hebron) Zephyrhills Fla.
Originally Posted by e dogg' post='874895' date='Jun 12 2007, 06:00 PM
thanks for the info, ill have do some legwork to see which one is best for me
Read all of the tech articles on www.yawpower.com
Become fully informed.
Lynn E. Hanover
Picture is of a bridgeported 12A iron but shows what you will be looking for. Closing line is the same as late closing the intake valve on a piston engine. The later the closing point the poorer the bottom end.
Senior Member
Joined: Feb 2005
Posts: 1,579
From: Kissimmee FL.
Originally Posted by Judge Ito' post='876462' date='Jun 28 2007, 06:21 AM
my template are available.. simple as microwave popcorn.
would you have any pics of your templates in relation to stock ports?
im looking for a 13b-rew bridge or half bridge template. but i would like to see the template over the stock port to see how agressive it is. and how much are they?
thanks...
