Porting Templates
06-12-2007, 06:43 PM
#2
Senior Member
Join Date: Mar 2004
Location: MD
Posts: 558
06-12-2007, 08:00 PM
#3
Junior Member
Thread Starter
Join Date: Jun 2007
Posts: 3
Originally Posted by RotaryVillain' post='874883' date='Jun 12 2007, 03:43 PM
thanks for the info, ill have do some legwork to see which one is best for me
06-13-2007, 07:52 AM
#6
Fabricator
Join Date: Jan 2004
Location: Central Ohio (Hebron) Zephyrhills Fla.
Posts: 1,322
Originally Posted by e dogg' post='874895' date='Jun 12 2007, 06:00 PM
thanks for the info, ill have do some legwork to see which one is best for me
Read all of the tech articles on www.yawpower.com
Become fully informed.
Lynn E. Hanover
Picture is of a bridgeported 12A iron but shows what you will be looking for. Closing line is the same as late closing the intake valve on a piston engine. The later the closing point the poorer the bottom end.
06-13-2007, 08:07 AM
#7
Fabricator
Join Date: Jan 2004
Location: Central Ohio (Hebron) Zephyrhills Fla.
Posts: 1,322
Originally Posted by e dogg' post='874895' date='Jun 12 2007, 06:00 PM
thanks for the info, ill have do some legwork to see which one is best for me
Read all of the tech articles on www.yawpower.com
Become fully informed.
Lynn E. Hanover
Picture is of a bridgeported 12A iron but shows what you will be looking for. Closing line is the same as late closing the intake valve on a piston engine. The later the closing point the poorer the bottom end.
06-28-2007, 05:36 PM
#10
Senior Member
Join Date: Feb 2005
Location: Kissimmee FL.
Posts: 1,579
Originally Posted by Judge Ito' post='876462' date='Jun 28 2007, 06:21 AM
my template are available.. simple as microwave popcorn.
would you have any pics of your templates in relation to stock ports?
im looking for a 13b-rew bridge or half bridge template. but i would like to see the template over the stock port to see how agressive it is. and how much are they?
thanks...