Whats the normal limits for a stock 3rd gen turbo engine? The mods my friend is planing are full exhaust header to muffler no cat, swich to external wategete and increase boost, Bigger injectors, fuel pump and a spearco intercooler. bigger turbos https://www.nopistons.com/forums/pub...IR#>/dunno.gif . What should the boost level be set around? Im not fimilar with rotary engine strength.

umm, the sky is the limit. you are just saying random things..................... most high hp rotaries on the street are 500rwhp....

Well after you upgrade the rods and pistons, you could get over 400rwhp out of it. With the stock block, he will likely blow it up with an external wastegate on the twins.



Your sentence makes no sense. Does your friend have an RX7? If so then he needs to post a more accurate list than that.

hahaha yeah but hey! make sure you get an upgraded yellow valve cover that says vtec on it!!! those are sooooo tight. they should be on ebay for sure!!! :smirk:

well since the only aftermarket parts you can buy for a rotary (within almost reasonable prices) are e-shaft and apex seals. I'd have to say that they're VERY strong.

However you can have twisting, but that can be solved by adding a couple extra dowelpinns

Stock internals are good to 1400 hp :twisted:

:bsflag: OMG!! What a lie. I am pushing well over 1800hp with my stock twins set to 90psi! :rant:



And thats on regular unleaded too!! https://www.nopistons.com/forums/pub...IR#>/boink.gif

yeah, I've heard that a cat-back exhaust will get your hp over 1000

Lets not be a jackass to this guy, we all at one point we're in his shoes. But yes we need some more info about yours friends car. We need to know which turbos, which parts etc. And no fds use headers, since they are all turbocharged, headers are for n/a cars. With that amount of mods ppl usually uprgrade the engine internally, hardend gears, dowel pinned etc. So not many ppl have pushed the stock internals.

yes sir mister moderator sir!!!! https://www.nopistons.com/forums/pub...O_DIR#>/11.gif