Looking To Port My Engine
01-03-2004, 09:10 PM
#1
Senior Member
Thread Starter
Join Date: Sep 2003
Location: Albany, New York
Posts: 571
I dont know if this is the right place to be posting this, but you guys seem to know alot about what to do and how to do it, but I am not looking to do it myself. I have an 87 SE w/ the 6 ports. This will be done along with an engine rebuild because I have 110K on my engine. So, my questions are where can I send my engine to have it street ported? How much am I looking at paying? Thanks alot.
01-03-2004, 10:28 PM
#3
Senior Member
Join Date: Jun 2003
Location: Grand Prairie, TX
Posts: 917
Originally Posted by 93BlackFD' date='Jan 3 2004, 08:12 PM
try pm'ing BDC, he's really good with port work and his pricing is very reasonable
Just keep in mind that the port work that most people do (including myself) involves all 5 engine housings and there may be some shipping costs there. Unless you're die-hard and planning on rebuilding it, I could do both the port work and the labour. PM me on it and I'll shoot you some labour rates, etc. for stuff. I'm in the Dallas/Ft. Worth area.
B
01-06-2004, 10:23 PM
#4
Senior Member
Join Date: Dec 2003
Location: Southeast
Posts: 502
ME ME ME ME ME...........AAAAAHHHHHHH BDC got here before me dang. 
LOL just joking. You got the right man BDC.
I know BDC doesnt remember but a couple of years ago we did the Haltech/Hitman email thing. I still have some emails printed that you sent me when I was setting the Haltech up in my FC.
Now you have convinced me to do that thar Turbo bridge thang thar man. Motor is all done and ready to be installed, just need to address the chassis before installing the juice . Will post the setup soon. I know this motor is gonna make some real numbers.
Anyhow cps87rx7se you will have chosen the right brother to do your motor. Forget the Big name Co's.
HEY!!!!! BDC HOW THE HELL YOU FIND TIME TO DO ALL THAT WORK, WHEN YOU ARE ALL OVER THE FORUMS SPREADING THAT KNOWLEDGE.
I know BDC doesnt remember but a couple of years ago we did the Haltech/Hitman email thing. I still have some emails printed that you sent me when I was setting the Haltech up in my FC.
Now you have convinced me to do that thar Turbo bridge thang thar man. Motor is all done and ready to be installed, just need to address the chassis before installing the juice
Anyhow cps87rx7se you will have chosen the right brother to do your motor. Forget the Big name Co's.
HEY!!!!! BDC HOW THE HELL YOU FIND TIME TO DO ALL THAT WORK, WHEN YOU ARE ALL OVER THE FORUMS SPREADING THAT KNOWLEDGE.
01-06-2004, 11:50 PM
#5
Senior Member
Join Date: Sep 2002
Posts: 1,089
not taking anything away from BDC here, ive seen his work and it is excelent. but another option that may be easier/cheaper for you because we are closer, is J&R Performance/ Smokin Joe Racing.
they are located in Elmont NY and do excelent work.
ask for Joe. (516) 616-5812
theres also T&R racing in Jamaice NY.
I'd suggest you call all 3 parties mentioned and make your decision after speaking to them
Roan
SmokinJoeRacing.net
(516) 616-5812
they are located in Elmont NY and do excelent work.
ask for Joe. (516) 616-5812
theres also T&R racing in Jamaice NY.
I'd suggest you call all 3 parties mentioned and make your decision after speaking to them
Roan
SmokinJoeRacing.net
(516) 616-5812
01-07-2004, 04:14 PM
#9
Senior Member
Join Date: Jun 2003
Location: Grand Prairie, TX
Posts: 917
Originally Posted by Midnightdriver' date='Jan 7 2004, 01:12 PM
B
01-07-2004, 06:12 PM
#10
Senior Member
Join Date: Jan 2002
Location: NJ USA
Posts: 1,915
Originally Posted by banzaitoyota' date='Jan 7 2004, 12:55 PM
Don't forget about Judge ITO!!!
And Pineapple Racing can port, but I and others have had less than optimum results from them in their longevity of the engine.
And Pineapple Racing can port, but I and others have had less than optimum results from them in their longevity of the engine.