when installing series 5 rotors in place of series 4, you also need the front counterweight from a series 5, correct? or is it not absolutely necessary?



thanks

 

Yeap, and the series flywheel to match also

 

Both the front and rear counterweights are required. If you don't do the full swap then you'll have alot of problems.

 

Both the S5 FC and the FD flywheels will work. If you go with a lightweight flywheel then you'll just need an 89-85 A/T counterweight. The counterweight from a Cosmo 13B RE will also work.

 

so if i the guy doesnt happen to have the front counter weight, i can just get a lightned flywheel and counter weight combo thingie, correct?



he did say he had everything except for the crank, so well see.



this is NA stuff, will the FD flywheel still work?



thanks

 

You'll still need the front counterweight. The FD flywheel will work, but a TII or NA flywheel should be much easier to find, as well as being much cheaper. The TII and FD flywheel won't work with the NA clutch.