Damn Pilot Bearing
Thread Starter
Senior Member
Joined: Oct 2001
Posts: 790
From: Portland, OR
Originally Posted by C. Ludwig' post='900596' date='May 18 2008, 04:48 AM
I've heard bread works too. Never tried it though. The Mazda tool is worth it's weight in gasoline. 
Here is what I used:
BLIND HOLE BEARING PULLER
Designed especially for pilot bearings and other jobs that require an internal puller.
3 lb. slide hammer with T-handle for secure grip
Chrome-plated shaft for smooth operation
Four collets: 3/8" to 1/2", 9/16" to 11/16", 5/8" to 1", 1" to 1-1/4"
Blow mold case
Senior Member
Joined: Oct 2003
Posts: 352
Originally Posted by dac' post='900644' date='May 19 2008, 12:47 AM
Here is what I used:
BLIND HOLE BEARING PULLER
Designed especially for pilot bearings and other jobs that require an internal puller.
3 lb. slide hammer with T-handle for secure grip
Chrome-plated shaft for smooth operation
Four collets: 3/8" to 1/2", 9/16" to 11/16", 5/8" to 1", 1" to 1-1/4"
Blow mold case
BLIND HOLE BEARING PULLER
Designed especially for pilot bearings and other jobs that require an internal puller.
3 lb. slide hammer with T-handle for secure grip
Chrome-plated shaft for smooth operation
Four collets: 3/8" to 1/2", 9/16" to 11/16", 5/8" to 1", 1" to 1-1/4"
Blow mold case
The head design looks identical to what Mazda uses.
Member
Joined: Jun 2004
Posts: 52
From: Slidell, LA
Another trick fill the hole with grease then take a rod or bolt that just fits inside the bore. Whack it with a hammer and the bearing pops out.
(using a rag around the affected area doesn't hurt either.)
Barry
(using a rag around the affected area doesn't hurt either.)
Barry
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
