uh yes, but didnt no for sure.

ummm, i wouldnt ever touch that. ever. sell it on e-bay to some sucker if you want a shady rep.

[quote name='skim41' date='Apr 3 2005, 01:41 AM']Hi,



Oke, thats honest. Why not, and what width would you use, my plan was 2,5-3mm that worked everywhere except on the bottom.....


[/quote]





Because it wont last a week. And I dont build engines to have them fail. The bridge is way too narrow, theres almost nothing to support the corner seal, not to mention a bridge than thin will break within a matter of days.

I say put it togather just to see it blow up!

It will work but wont last long. If its your first go with it so you learn from your mistakes,its the only way to learn. https://www.nopistons.com/forums/pub...IR#>/bigok.gif

[quote name='PUNTOROTARY' date='Apr 10 2005, 01:51 PM']It will work but wont last long. If its your first go with it so you learn from your mistakes,its the only way to learn. https://www.nopistons.com/forums/pub...IR#>/bigok.gif


[/quote]







Or you could always save some money and listen to the rest of us that are telling you its got a new job as a door stop, maybe even a pretty paper weight. I wouldnt use it man you'll be sorry.





-Shawn

That bridge won't last, maybe a few days of fun. If you enjoy pulling motors go ahead and put it together and keep us informed as to when that tooth pick breaks.

Not a great example but look at yours and look at this Half BridgePIC

[quote name='1revnrex' date='Apr 10 2005, 05:31 PM']Not a great example but look at yours and look at this Half BridgePIC


[/quote]

Or this

Check this thread https://www.nopistons.com/forums/index.php?...topic=49717&hl=

Sorry to bust your bubble but you got to go do it again, buy a new plate. https://www.nopistons.com/forums/pub...1047683664.gif