Apex Seal Clearance
#1
I have just put together a n/a 13b for a friend and set the apex seal end clearance to 0.1mm(0.004) and now read that carbon seals, which we are using, should be 0.0045-0.0055. Would it advisable to pull the engine down and increase the clearance or would it be OK as is?
#2
Originally Posted by Mark T.' post='878583' date='Jul 26 2007, 04:22 AM
I have just put together a n/a 13b for a friend and set the apex seal end clearance to 0.1mm(0.004) and now read that carbon seals, which we are using, should be 0.0045-0.0055. Would it advisable to pull the engine down and increase the clearance or would it be OK as is?
Thread
Thread Starter
Forum
Replies
Last Post
13BT-RX3
Rotary Engine Building, Porting & Swaps
18
07-05-2009 01:35 AM
-xlr8planet-
Rotary Engine Building, Porting & Swaps
5
12-28-2008 11:51 AM
White_FC
Rotary Engine Building, Porting & Swaps
4
03-11-2004 10:45 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)