I have just put together a n/a 13b for a friend and set the apex seal end clearance to 0.1mm(0.004) and now read that carbon seals, which we are using, should be 0.0045-0.0055. Would it advisable to pull the engine down and increase the clearance or would it be OK as is?
|
Originally Posted by Mark T.' post='878583' date='Jul 26 2007, 04:22 AM
I have just put together a n/a 13b for a friend and set the apex seal end clearance to 0.1mm(0.004) and now read that carbon seals, which we are using, should be 0.0045-0.0055. Would it advisable to pull the engine down and increase the clearance or would it be OK as is?
|
it will wear in over time, i might stick to a slightly lower redline for a bit
|
All times are GMT -5. The time now is 08:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands