50% meth/alky?
Senior Member
Joined: May 2005
Posts: 446
From: central WA state
Originally Posted by j9fd3s' post='862884' date='Mar 9 2007, 01:41 PM
how about doing 50% alky and 50% pump fuel? been done? work well?
it leaves a nasty aftertaste on the steaks, but the bbq starts rapidly.....
Senior Member
Joined: Jun 2003
Posts: 917
From: Grand Prairie, TX
Originally Posted by jenkin' post='862928' date='Mar 9 2007, 06:04 PM
it leaves a nasty aftertaste on the steaks, but the bbq starts rapidly.....
Hahahaha!!!
Mike, not sure. Howard's doing somewhere around a 60/40 ratio of fuel to alcohol. Last time I checked, mine was 67/33 thereabouts at the end of the tune. Changing the ratio, IMO, throws a monkey wrench into the equation in terms of not only target A/F ratio but also what kind of advance can be run. It'd strike me that with richer alcohol, you can run more advance.
B
Thread Starter
Senior Member
Joined: May 2002
Posts: 22,465
From: California
Originally Posted by BDC' post='863861' date='Mar 16 2007, 10:37 AM
Hahahaha!!!
Mike, not sure. Howard's doing somewhere around a 60/40 ratio of fuel to alcohol. Last time I checked, mine was 67/33 thereabouts at the end of the tune. Changing the ratio, IMO, throws a monkey wrench into the equation in terms of not only target A/F ratio but also what kind of advance can be run. It'd strike me that with richer alcohol, you can run more advance.
B
i'm thinking about something dumb.... turbo na, stock ecu, fix it with alcohol....
Thread Starter
Senior Member
Joined: May 2002
Posts: 22,465
From: California
Originally Posted by sdminus' post='865977' date='Mar 30 2007, 01:46 PM
Why not just run 100 % meth !!!
Scott
i'm way too lazy to pull out the stock stuff, unless you're saying i can just put meth in the gas tank...
Senior Member
Joined: Oct 2001
Posts: 10,906
From: Peoria, AZ
Originally Posted by sdminus' post='865977' date='Mar 30 2007, 03:46 PM
Why not just run 100 % meth !!!
Scott
On a street car you're better off just running a pinch, aka AUXILIARY injection..
I have run a lot more like 30%, and in my experience if you are running that much you have something else wrong with your system...
Thread
Thread Starter
Forum
Replies
Last Post
z-beater
Rotary Engine Building, Porting & Swaps
19
Jul 8, 2010 07:05 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)