4port NA project. Porting opinions wanted

Reply Subscribe

Thread Tools

Search this Thread

11-17-2005, 12:25 PM

#11

BLUE TII

Member

Join Date: Oct 2004

Posts: 83

Quote:

Originally Posted by Ariel' post='779200' date='Nov 17 2005, 06:38 AM

Me too!

I wanted to assemble it last weekend, but since that was a bit optimistic, hopefully it will be this weekend.. That is the shortblock only though, I still need a new oil pump chain before I can fully assemble it, and need to figure out the length of cable needed to control the OMP by the fd throttle body, but other than that I have received all my parts (including the flywheel I was worried about).

Hmm, I think I used the 24" universal Lokar throttle cable for both OMP and throttle on mine- I will verify this tonight for you.

I think I have some pics of my primary ports as well.

I stacked my engine last weekend and am getting the engine hoist tonight!

11-17-2005, 02:08 PM

#12

Ariel

Junior Member

Thread Starter

Join Date: Sep 2004

Posts: 14

Quote:

Originally Posted by BLUE TII' post='779255' date='Nov 17 2005, 07:25 PM

Hmm, I think I used the 24" universal Lokar throttle cable for both OMP and throttle on mine- I will verify this tonight for you.

Thanks! Those are readily available on ebay, so that would be another thing I can remove from my todo-list.

11-18-2005, 02:27 AM

#13

kahren

Senior Member

Join Date: Jan 2002

Location: CT

Posts: 1,345

sounds like you are on the right track

are you going to use 9.7 compression rotors? you never mentioned it?

i hope u are

11-18-2005, 02:45 AM

#14

Ariel

Junior Member

Thread Starter

Join Date: Sep 2004

Posts: 14

Quote:

Originally Posted by kahren' post='779549' date='Nov 18 2005, 09:27 AM

are you going to use 9.7 compression rotors? you never mentioned it?

i hope u are

Not 9.7 but 9.4 as that is what I have on hand. I know it will limit my performance a bit, but hopefully not too much. Higher compression rotors is definately scheduled for a later upgrade though