|
Re: 4 Rotor Build in Sweden
7 Attachment(s)
This weekend I made some of my brackets for suspension. It dropped suddenly and has gone very well. Starting to agree with the TIG-welder, and begin to realize that TIG is for us who can not MIG / MAG :)
It is slow and calm :) https://www.nopistons.com/attachment...ine=1345478240 Then weld all as much as possible before it is installed in the car to where also welded into the frame. The sole purpose of avoiding weld so much in uncomfortable positions :) https://www.nopistons.com/attachment...ine=1345478240 Then the most important today :) I was to pick my crank! Finally! Now it's just for me to continue with splines etc.. Let the pictures speak for themselves :) https://www.nopistons.com/attachment...ine=1345478240 https://www.nopistons.com/attachment...ine=1345478240 https://www.nopistons.com/attachment...ine=1345478240 https://www.nopistons.com/attachment...ine=1345478240 Isn't she beautiful?? https://www.nopistons.com/attachment...ine=1345478240 |
Re: 4 Rotor Build in Sweden
Originally Posted by Tegheim
(Post 853731)
Isn't she beautiful??
|
Re: 4 Rotor Build in Sweden
Have some thoughts.
Do not know exactly how to setup my 4 rotor. I can build a full throttle PP, much power on high rev. Or perhaps a Semi-PP little more driveability, longer curves? Or, finally, a complete side-port setup? Sideport-setup takes som heavy mods on the FD-plates, but nothing is impossible. I would rather not overcharge, but it might be a possibility together with the side port and low boost. This first setup will not be a power-setup, it would be a road-legal-version if it's possible. What do you think? |
Re: 4 Rotor Build in Sweden
yes and no.......? semi pp might have you a better chance at keeping the noise down . but then less power. its your toy in the end. keep the pics coming.
|
Re: 4 Rotor Build in Sweden
1 Attachment(s)
Some new parts for the rear.
Waterjet is beautiful! https://www.nopistons.com/attachment...ine=1346261764 |
Re: 4 Rotor Build in Sweden
Great work!
|
Re: 4 Rotor Build in Sweden
2 Attachment(s)
Last friday I recived some new parts.
1pc front, 1pc rear, and 3pc intermediate-plates from FD. But I'm still looking for good housings... I have 2pc S4 N/A-housings that I can use, the other two are just for mockup. The best would be to find 2 S4 N/A, or get 4 new ones... https://www.nopistons.com/attachment...ine=1346696438 https://www.nopistons.com/attachment...ine=1346696438 Let the mods begin :-) |
Re: 4 Rotor Build in Sweden
1 Attachment(s)
Mother was with me in the garage today :)
https://www.nopistons.com/attachment...ine=1347129175 |
Re: 4 Rotor Build in Sweden
2 Attachment(s)
This is how it looks right now...
Hard to see the complete picture I think... https://www.nopistons.com/attachment...ine=1347903275 https://www.nopistons.com/attachment...ine=1347903275 |
Re: 4 Rotor Build in Sweden
Do you have drawings, and can I get a copy of the 4 rotor shaft drawings somewhere?
|
| All times are GMT -5. The time now is 08:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands