been runnin with the stock pulley since air pump removal

getting concerned about the contact patch for the water pump

decided to stop procrastinating and install the piece...

not to mention the previous owner havent replaced the belts

air ratchet wasnt enough

had to use air gun with pivot socket to avoid removing the fan shroud for clearance

although had to lift the ic to get some height on the alternator to be able to use it..

even with the pivoting socket extension

didnt reuse the stock washer..extra width on the pulley did not provide for it

tried usin the factory size belt for the rb alt pulley but couldnt maneuver it to fit..

had to make a return trip to the parts store for a belt two sizes larger



dual alt pulley .... fresh start vbelt 15325 11av0825

power steering .... dayco dynaflex vbelt 17385

ac .... dayco dynaflex vbelt 17420

 

you had better luck than I did! I have to take my alternator apart now...

 

i installed same pulley and my shiznit still slips? WTF

 

check your tension

you need to reset the tension after runnin the car..

check the manual for exact numbers

the rule of thumb is .25in deflection along its longest span..