Performance Coatings Available
11-28-2005, 03:44 PM
#31
Junior Member
Join Date: Jan 2003
Location: Dayton, Ohio
Posts: 6
Originally Posted by 1Revvin7' post='781983' date='Nov 28 2005, 08:15 AM
That thread has no bearing on this topic here. You are trying to say I purposly misinformed people by saying these coatings are good to a much higher temperature to gain sales, was any of that information stated here? No, you are just trying to be a jackass and make me look bad thats all, so yes I deleted your posts.
And FYI the HS GOLD is good for temperatures a lot higher than that guy stated, just because someone calls a company does not mean they are going to be let in on all the information. I am going to clear up a lot of this, this coming tuesday when I fly out to meet with Polydyn.
That thread has no bearing on this one?? That thread started with a gentleman asking for info and opinions on ceramic coatings, and specifically mentioned your name. At which point you came in and gave some info regarding your product. So it has everything to do with this topic.
Greg's first posts (the ones that were deleted) only had a link to the thread on the other forum. It was not his posts that were making you look like a "jack~ss." I think the fact that they were deleted states more than anything he posted.
FYI, for anyone that may be paying attention. I'm "that guy" that 1revvin7 is referring to (and there's a lot more to it than just "calling a company"). I don't really frequent nopistons, so please forgive me for that. I just want everyone to be as informed as possible, so they can make their own opinion. I invite everyone to check out the link provided above and take a look for yourself.
-Rob
11-29-2005, 06:00 AM
#32
Super Moderator
Join Date: Feb 2002
Location: Amityville, New York
Posts: 12,288
Originally Posted by GMON' post='780679' date='Nov 22 2005, 02:20 PM
The fact that a moderator is allowed to get away with this behavior on this board really sux. Nopistons is by far the most grass-roots down to earth rotary place there is. I hope it stays that way.
http://www.rx7club.com/showthread.ph...1&page=3&pp=15
that was the action of one person, not the whole board
regardless I think the damage is done to all sides, at this point its just a pissing match, keep posts to data or real information.
12-13-2005, 12:59 PM
#33
Junior Member
Join Date: Jan 2003
Location: Dayton, Ohio
Posts: 6
Originally Posted by 1Revvin7' post='781983' date='Nov 28 2005, 08:15 AM
... I am going to clear up a lot of this, this coming tuesday when I fly out to meet with Polydyn.
So how about an update? How did the meeting with polydyn go?
-Rob
12-13-2005, 11:42 PM
#34
Senior Member
Thread Starter
Join Date: Oct 2001
Location: Peoria, AZ
Posts: 10,906
Originally Posted by saxyman990' post='786160' date='Dec 13 2005, 02:59 PM
So how about an update? How did the meeting with polydyn go?
-Rob
I really don't care to get into a pissing match to prove that you are wrong.
However the meeting was fabulous, thanks for asking.
12-14-2005, 02:44 AM
#35
Senior Member
Join Date: Dec 2003
Location: Minneapolis,MN
Posts: 500
Originally Posted by 1Revvin7' post='786416' date='Dec 13 2005, 09:42 PM
I really don't care to get into a pissing match to prove that you are wrong.
Yes, Im sure that the man with the college degree is completely wrong.
What are your credentials again El? We should go out and have a drink some time. ooooo, thats right your not 21 yet
12-14-2005, 09:39 AM
#36
Junior Member
Join Date: Jan 2003
Location: Dayton, Ohio
Posts: 6
Originally Posted by 1Revvin7' post='786416' date='Dec 13 2005, 09:42 PM
I really don't care to get into a pissing match to prove that you are wrong.
However the meeting was fabulous, thanks for asking.
None of my posts were based solely on the premise of simply getting into a pissing match, so I'm sorry that you feel that way. All I've been interested in since day one has been the correct information, in order to help those forum members that may possibly be interested in the producs. For nothing else than the sake of your customers, one would think that you would have an extreme desire to prove me wrong. A few posts ago Robx-7 asked that we keep further posts to real data and information. I was just kindly asking if there were any updates. Apparently not.
I'm truely glad that your meeting went well. I hope that one of these days you'll care to share some of that information with your past and potential customers.
God speed,
-Rob
12-14-2005, 11:14 AM
#37
Senior Member
Thread Starter
Join Date: Oct 2001
Location: Peoria, AZ
Posts: 10,906
Originally Posted by saxyman990' post='786513' date='Dec 14 2005, 11:39 AM
None of my posts were based solely on the premise of simply getting into a pissing match, so I'm sorry that you feel that way. All I've been interested in since day one has been the correct information, in order to help those forum members that may possibly be interested in the producs. For nothing else than the sake of your customers, one would think that you would have an extreme desire to prove me wrong. A few posts ago Robx-7 asked that we keep further posts to real data and information. I was just kindly asking if there were any updates. Apparently not.
I'm truely glad that your meeting went well. I hope that one of these days you'll care to share some of that information with your past and potential customers.
God speed,
-Rob
Man alive are you full of ****.
"Sigh...
I guess you missed the point of my post. I suppose it was a little too subtle. So let me explain it more clearly for you: I know that you're full of crap, and you quite obviously don't know what you're talking about. My last post was an attempt to point that out in a nice, and non-flaming manner."
That sounds exactly like someone who is out to help the rx7 community. This has been nothing more than an ego fight for you.
12-14-2005, 01:19 PM
#38
Junior Member
Join Date: Jan 2003
Location: Dayton, Ohio
Posts: 6
Originally Posted by 1Revvin7' post='786551' date='Dec 14 2005, 09:14 AM
That sounds exactly like someone who is out to help the rx7 community. This has been nothing more than an ego fight for you.
Damn right I'm out to help the RX-7 community. Most of the people that have read that thread will agree. If you think I give a crap about my ego or yours then I think you missed the boat. I'm a geeky engineer, and have virtually no ego to begin with, and therefore no reason to fight over it. My underlying intentions have been and always will be for the good of rotary enthusiasts. You were spouting erroneous and grossly uninformed information. I didn't like that fact.
Mods: I appologize for this post not containing worthwhile data or info. Feel free to delete if you wish. I'll go back over to the "other forum" now.
-Rob
12-14-2005, 11:00 PM
#39
Super Moderator
Join Date: Feb 2002
Location: Amityville, New York
Posts: 12,288
ok, so that went well