teknics

Ok i'm pklanning on using the setup vosko used, 3 MSD 6A's, 1 for the leading plugs and then 1 for EACH trailing plug.



I figure the stock coils are ****, so lets not count on using them.



Any suggestions on a good replacement that will work well and be an improvement over stock, other then the 20b coil packs?



im finalizign the details for my next big purchase (custom rails, 1680cc injectors, aeromotive fpr, -6 and -8 AN fittings with s/s braided line, possibly dual walbros, haltech e6k, and these 3 msd units)



kevin.

an_juan

you know, I have a crane hi-6 that I used for a long time with the stock coils, and it worked great. Then I decided to buy 2 ps-92 coils (crane also) and wire them up in parallel for the leading. I talked to a crane tech guy (after I bought the coils) and he said it would never work in parallel. I still don't understand why, and his answer never satisfied me.



Anywho, I never did find out if wiring 2 crane coils would work with a hi6 because my engine blew before I got a chance to experiment. I would think it works the same way as the msd, but the sucka at crane said it'll never work. I don't know what to think.

tcb100

On the "other forum" these was a discussion of this suject recently. Judge ito was trying to get MSDs to work. It's in the performace section.