Chopped at celica
#11
Originally Posted by willjs7' post='789736' date='Dec 24 2005, 12:24 PM
someone explain what double clutching is, and what its good for?
i double clutch 1st to 2nd because i have a brass button clutch and i was changeing gears at 9000rpm so i didnt wanna snap it in a go sideways
and double clutching just slows down the shifting abit and transfers the rpm to the wheels abit better
for every1 that doesnt know double clutching is when you put the clutch in take it half the way out put it back in tap the accelerator and change gears as you tap the accelerator then take your foot off the clutch
its quite easy you just need to be quick with it
#14
letting the clutch out half way does nothing. to do a true double clutch you are shifting from 3-2. You press the clutch. put car in neutral, let out clutch. Push clutch in and shift to 2nd. It helps extend the life in your transmission. I don't know what your doing but its not double clutching. I've never had my car going sideways when I take off. It takes a lot of power to twist a car sideways on a shift, ie: pro drag car.
#16
What some refer to as double clutching is upon acceleration, kicking the clutch to allow the RPM to jump in range a little..getting into power band a little sooner...typical VTEC, VVTI, etc technique... it's been proven on the track to gain a tenth or so...but it's pointless on most vehicles.
Double clutching can also be what donhayes speaks of, thats a typical thing for semi-truck drivers to do..you sometimes have to depending on the truck/load.
What rotaheadalex is talking about almost sounds like feathering the clutch...if done right...can be good to keep traction on cars with decent power..if done wrong or too often..prematurely kills the clutch disc.
Double clutching can also be what donhayes speaks of, thats a typical thing for semi-truck drivers to do..you sometimes have to depending on the truck/load.
What rotaheadalex is talking about almost sounds like feathering the clutch...if done right...can be good to keep traction on cars with decent power..if done wrong or too often..prematurely kills the clutch disc.
#18
Originally Posted by ForceFed06' post='799114' date='Feb 2 2006, 07:17 PM
man i just blew the welds on my intake
see...this is why people dont post on forums because its ********* like you that make a joke but take it too far....fair enough if you have a little joke....im all down for that but c'mon man your treating another rotorhead like a piece of **** and no one deserves that
#19
Originally Posted by rotaheadalex' post='809468' date='Mar 22 2006, 09:34 PM
see...this is why people dont post on forums because its ********* like you that make a joke but take it too far....fair enough if you have a little joke....im all down for that but c'mon man your treating another rotorhead like a piece of **** and no one deserves that
get used to it
#20
Originally Posted by One320B' post='796057' date='Jan 24 2006, 09:59 AM
What some refer to as double clutching is upon acceleration, kicking the clutch to allow the RPM to jump in range a little..getting into power band a little sooner...typical VTEC, VVTI, etc technique... it's been proven on the track to gain a tenth or so...but it's pointless on most vehicles.
Double clutching can also be what donhayes speaks of, thats a typical thing for semi-truck drivers to do..you sometimes have to depending on the truck/load.
What rotaheadalex is talking about almost sounds like feathering the clutch...if done right...can be good to keep traction on cars with decent power..if done wrong or too often..prematurely kills the clutch disc.
truckers dont clutch it at all unless they are stopped. thats why you see so many broken down semi trucks after a hill on the highway. its hard to time the rpms right when goin up a hill.
p.s. my aunt drives a semi and used to own her own business.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)