Rear Bins
#12
Originally Posted by Sinful7' date='Jun 26 2003, 09:35 AM
I don't get it... what's the deal with these bins, Justin?
#13
Originally Posted by 9BASE3' date='Jun 26 2003, 10:59 AM
Rob, I like that first one... I'm going to look around and see what I can find. Thanks!
rusting, the ring obviously lifts up when you need it.
You could also spray it black to blend as well.
#14
I found the things you needed today, and now I *******
forgot who makes them, I forget my own name sometimes, lol
They are nice, they almost look like a quarter with nothing on it
and it sits almost totally flat, you lift up on it to raise the hatch.
forgot who makes them, I forget my own name sometimes, lol
They are nice, they almost look like a quarter with nothing on it
and it sits almost totally flat, you lift up on it to raise the hatch.
#16
Originally Posted by Rob x-7' date='Jul 8 2003, 06:13 PM
here it is!
large pic of it, but you get the idea, they are cheap and they
are stainless, paint them,polish them, leave them be, your choice
large pic of it, but you get the idea, they are cheap and they
are stainless, paint them,polish them, leave them be, your choice
#18
Originally Posted by Rob x-7' date='Jul 11 2003, 06:29 PM
any boating supply places by you?
if not I can send you a pair.
if not I can send you a pair.
#19
my cost like $3-$4 each or some ****?
Online I found a place for $6 and change, plus shipping.
I dont know what your going to keep in the bins but remember
the shank will need clearance when its sitting flat, its super thin,
only 3/16", and its 2" long so it wont need much, but if your going
to fill your bins to the brim you will need to make sure there is
room for the shank.
Here are the specifics of it:
Features:
Made of .304 Stainless steel with an electro polished finish.
2" x 3/16" diam. shank.
Pull plate is 1-1/4" dia. x 1/8" thick.
Stainless steel washer and ring.
Online I found a place for $6 and change, plus shipping.
I dont know what your going to keep in the bins but remember
the shank will need clearance when its sitting flat, its super thin,
only 3/16", and its 2" long so it wont need much, but if your going
to fill your bins to the brim you will need to make sure there is
room for the shank.
Here are the specifics of it:
Features:
Made of .304 Stainless steel with an electro polished finish.
2" x 3/16" diam. shank.
Pull plate is 1-1/4" dia. x 1/8" thick.
Stainless steel washer and ring.