I suppose...<_<

 

Nice, That was a good price for the 2k5 model. Find a way to bring it to rotorfest.

Oh and when you want, let me know, and I'll tell you how to make it fast. they are slow as hell off the line. Mine is quite "peppy" now

 

theese are the "cheap" mods. aftermarket airfilter and exhaust would cost $200, mine cost about $6 and I keep up with a guy who has the $200 in upgrades!!!



First, the factory airbox is sealed up with only a few pencil size holes underneath to suck in air. I cut the front of the box off, put in a piece of "breather filter", added a screen and I was done. Just saved $40 and I noticed an immediate difference.

 

next, this the the exhaust flange, the hole is tiny compared to the exhaust port on the engine. Dremel out all the area inside the box, and you are done. Just saved $160.

 

here is my bike now. Going through some more mods tomorrow.



Justin, here are some tips if your bike vibrates alot. get a piece of rubber(I cut out the sidewall of an old tire) and put it between the engine and chassis. Also check the chain tension. Usually they come super tight, this makes some vibration, and robs you of HP.

Oh and if you do the air and exhaust mods you will have to richen up the mix on the carb. They sell "HP" carbs for about $50-100, they are standard walbro carbs, only diff. is they have 2 adj. needles, while ours only have 1. Working on that too. I will find a cheaper way

 

Why was that only 300?



The motors alone up here are selling for like 800 CDN

 

Check out this vid. the camera bike is allmost stock, the "other" bike is modified"



50mph!

 

That's hilarious!

 

He rented an ice cream truck for $300, drove around, and mugged some little kid for the bike