Replica Re-amemiya Diffuser
#331
Originally Posted by rotaryextreme' date='May 4 2004, 12:29 AM
For those of you who can take some nice digital photos of the diffuser on your car, please send those to me to rotaryextreme@aol.com. If I end up using your photo, I will send you a free DVD.
Chuck Huang
Chuck Huang
#332
Originally Posted by FikseRxSeven' date='May 3 2004, 06:17 PM
hey prew....... what are the chances of me putting my mudguard back on on top of this?
#335
Mine arrived today. No instructions, but should be straighforward for the rear part. How are people mounting the front of it?
Also, mine had several scrapes in the black finish showing white underneath. They are on visible areas so I don't think touching them up will look good. I guess I need to repain the whole thing. Chcuk- of the can spraypaints out there, do you recommend a particular brand that matches? Matte black is what I'l use unless you say otherwise.
Also, mine had several scrapes in the black finish showing white underneath. They are on visible areas so I don't think touching them up will look good. I guess I need to repain the whole thing. Chcuk- of the can spraypaints out there, do you recommend a particular brand that matches? Matte black is what I'l use unless you say otherwise.
#336
the installation is straightforward. u put 3 screws under the plate, i used longer new screws. then the 2 towards the front of the car go onto the gas tank straps, i took off the sheild that was there. then pull the sides into ur fenders, drill a hole and put a screw in each side. if it doesnt come up to the bumper how you expected you can screw through it into the bumper and put a couple of rivets in to hold it up. hope this helps.
i should get some good pics tomorow, the cars in a show.
steve prew
i should get some good pics tomorow, the cars in a show.
steve prew
#337
Originally Posted by rotaryextreme' date='May 4 2004, 12:29 AM
For those of you who can take some nice digital photos of the diffuser on your car, please send those to me to rotaryextreme@aol.com. If I end up using your photo, I will send you a free DVD.
Chuck Huang
Chuck Huang
#338
Originally Posted by prew' date='May 7 2004, 06:28 PM
the installation is straightforward. u put 3 screws under the plate, i used longer new screws. then the 2 towards the front of the car go onto the gas tank straps, i took off the sheild that was there. then pull the sides into ur fenders, drill a hole and put a screw in each side. if it doesnt come up to the bumper how you expected you can screw through it into the bumper and put a couple of rivets in to hold it up. hope this helps.
i should get some good pics tomorow, the cars in a show.
steve prew
i should get some good pics tomorow, the cars in a show.
steve prew
i saw ur car at the show and the diffuser looks really good. i think when i went by u had just gotten up for a phone call and then i didnt spot u.