Wiring?
04-01-2003, 07:29 PM
#1
Senior Member
Thread Starter
Join Date: Jul 2002
Posts: 107
Im swapping all my old 87 TII equipmenty into my newly acquired 88 n/a, what part of the wiring harness needs to be chaNGED? The part coming out the driver side of firewall just connects to light s and such, the paRT coming out of passenger side goes to motor...is that the only part that needs changing?? if not, plz give me some details
04-19-2003, 01:15 AM
#2
Senior Member
Join Date: Oct 2002
Posts: 378
www.rotaryresurrection.com under the tech section...you can keep the drivers side harness with minor wire extened I believe.
04-21-2003, 08:44 PM
#3
Senior Member
Join Date: Aug 2001
Location: Pimp'n ain't E-Z! But driving ur FD makes it easier!
Posts: 2,705
Since you still have the S4...the ECU shouldn't change..and you should be able to keep your interior harness. When I did my conversion, I had to change every harness since I went from S4 to S5...the motor harness is the most important, there will be a few little plugs left over under the dash from the factory boost guage, so you may run into a small issue there..but again..its not important.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
