What Is A 20b?
#1
If a 20b is the same thing as a 13b, but with an extra rotar, that means if I have 2 13b's i can build a 3 or maybe even a 4 rotor motor?
Ill just run it on an stand alone ecu of some type?
OR AM I JUST CRAZY :smirk:
Ill just run it on an stand alone ecu of some type?
OR AM I JUST CRAZY :smirk:
#3
If a 20b is the same thing as a 13b, but with an extra rotar, that means if I have 2 13b's i can build a 3 or maybe even a 4 rotor motor?
Ill just run it on an stand alone ecu of some type?
OR AM I JUST CRAZY
Ill just run it on an stand alone ecu of some type?
OR AM I JUST CRAZY
12a = 1.2 liters
13b = 1.3 liters
20b = 2.0 liters
i hope im right, please feel free to correct me if im wrong.
good luck building that motor. i see that happening real soon
13b = 1.3 liters
20b = 2.0 liters
i hope im right, please feel free to correct me if im wrong.
good luck building that motor. i see that happening real soon
#4
If you have to ask. what these engines are, you shouldn't even think about building one.
There are a substantial amount of things you will need to fabricate to get this to work. Its not as easy as stacking rotor housings. You are also going to have to use a 20b eccentric shaft or if you make a 4 rotor one will have to be fabricated.
To do a 20b swap RIGHT it will cost you anywhere from $10,000 to $40,000.
A four rotor can easily pass the $100,000 mark.
There are a substantial amount of things you will need to fabricate to get this to work. Its not as easy as stacking rotor housings. You are also going to have to use a 20b eccentric shaft or if you make a 4 rotor one will have to be fabricated.
To do a 20b swap RIGHT it will cost you anywhere from $10,000 to $40,000.
A four rotor can easily pass the $100,000 mark.
#5
If you have to ask. what these engines are, you shouldn't even think about building one.
There are a substantial amount of things you will need to fabricate to get this to work. Its not as easy as stacking rotor housings. You are also going to have to use a 20b eccentric shaft or if you make a 4 rotor one will have to be fabricated.
To do a 20b swap RIGHT it will cost you anywhere from $10,000 to $40,000.
A four rotor can easily pass the $100,000 mark.
There are a substantial amount of things you will need to fabricate to get this to work. Its not as easy as stacking rotor housings. You are also going to have to use a 20b eccentric shaft or if you make a 4 rotor one will have to be fabricated.
To do a 20b swap RIGHT it will cost you anywhere from $10,000 to $40,000.
A four rotor can easily pass the $100,000 mark.
#6
13b 3 rotor engines are used in Austrailia but you need to start with getting a custom e-shaft then take it from there.The hitman uses a 13b 3 rotor race engine in his.Just do a search on the Hitman.His first gen rocks.
#7
#8
Im almost certain that it will not cost me 10 000 or 40 000.(ue a bit crazy) But the 2 engins will cost not even 1000$.So ill go with a motec for about what 1500$. Then all that is left is custom fbrs...
Instead of going and see mazda speed to ask for sumtin custum ill just go see my freindly neighborhood machinest..
I don't even need to put labour into this, because ill do everything myself.(mountin the engine dat is.) The only bitch dat comes to mind is the essentric shaft(which i think i can track one down from a cosmo),and the............... A think dat's it.
Instead of going and see mazda speed to ask for sumtin custum ill just go see my freindly neighborhood machinest..
I don't even need to put labour into this, because ill do everything myself.(mountin the engine dat is.) The only bitch dat comes to mind is the essentric shaft(which i think i can track one down from a cosmo),and the............... A think dat's it.
#9
Wow your telling people who have done this swap that theyre full of **** and it doesnt cost that much?
You said that, without knowing what a 20b is?
SORRY I GET A LITTLE TUNED ON WEN I SEE 20B'S...............
#10
Originally Posted by Dr_Rotary' date='Jan 26 2003, 03:16 PM
Im almost certain that it will not cost me 10 000 or 40 000.(ue a bit crazy) But the 2 engins will cost not even 1000$.So ill go with a motec for about what 1500$. Then all that is left is custom fbrs...
Instead of going and see mazda speed to ask for sumtin custum ill just go see my freindly neighborhood machinest..
I don't even need to put labour into this, because ill do everything myself.(mountin the engine dat is.) The only bitch dat comes to mind is the essentric shaft(which i think i can track one down from a cosmo),and the............... A think dat's it.
Instead of going and see mazda speed to ask for sumtin custum ill just go see my freindly neighborhood machinest..
I don't even need to put labour into this, because ill do everything myself.(mountin the engine dat is.) The only bitch dat comes to mind is the essentric shaft(which i think i can track one down from a cosmo),and the............... A think dat's it.