Skyline Gtr In Rx7 3rd Gen
#41
Originally Posted by JT-Imports' date='Sep 16 2003, 11:53 PM
TheCamel---RB26s wont last long over 1000hp either, the blocks cant take it, I have seen quite a few of them warp. T51S will get you there with some MAJOR block work, but like I said it wont last long. TRANNY work OH DAMN I dont want to even get into that HAHAHA
TOO MUCH WORK
I think GTRs are slow. Nice ride at about 700hp, anything more and you will be broken every other day, any less and your starting to get smoked by other rides.
"wanta be boosted QUOTE:"
"There isn't any 2 rotor engine that could suport 1000 HP! Nor is there any 7 that could keep up with a modded supra7."
You might have to come to Japan some time hehe Im not saying I have seen 1000hp 2 rotors, but I will show you a couple 700hp FDs that will smoke check a few 1000hp supras
TOO MUCH WORK
I think GTRs are slow. Nice ride at about 700hp, anything more and you will be broken every other day, any less and your starting to get smoked by other rides.
"wanta be boosted QUOTE:"
"There isn't any 2 rotor engine that could suport 1000 HP! Nor is there any 7 that could keep up with a modded supra7."
You might have to come to Japan some time hehe Im not saying I have seen 1000hp 2 rotors, but I will show you a couple 700hp FDs that will smoke check a few 1000hp supras
But then again I don't hear much about them besides the positives.
#42
Man everyone and their mother has a GTR around here.
When I was on base, on-base mind you I knew
6 GTR guys---One with 1000hp and one with around 600hp
I watched the 1000hp guy build his engine OOO about 6 different times. He was damn good at it too, just he needs kept changing. ANYWAY he put the T51S on there and it warped the (front I think) of the block where the crank runs into the block. Im talking it went right threw the bearing and right into the block like a hot knife in butter haha. Anyway we looked into it for a long time and he had never seen it. Turns out most everyone (race teams) that have GTRs are manufactuering their own blocks to increase strength, he found out these blocks were about 10K HUMMMM and now the GTR is on blocks HAHA HOW FAST CAN YOU GO? I rode in that focker and that thing is bad ****, but only for a drag car................. I like my FD hehe I would like it more with a 20B,
damn somewhere around 15 people with GTS-Ts or some type just the same. One with a RB26 in it, he does curcuit but I would say around the 650-700hp range. One guy with a T51R-but no engine work so I would say 500hp or around it, he had some CAMS hehe
now 3 FDs on base
and about 4 FCs on base
no other RX7s
When I was on base, on-base mind you I knew
6 GTR guys---One with 1000hp and one with around 600hp
I watched the 1000hp guy build his engine OOO about 6 different times. He was damn good at it too, just he needs kept changing. ANYWAY he put the T51S on there and it warped the (front I think) of the block where the crank runs into the block. Im talking it went right threw the bearing and right into the block like a hot knife in butter haha. Anyway we looked into it for a long time and he had never seen it. Turns out most everyone (race teams) that have GTRs are manufactuering their own blocks to increase strength, he found out these blocks were about 10K HUMMMM and now the GTR is on blocks HAHA HOW FAST CAN YOU GO? I rode in that focker and that thing is bad ****, but only for a drag car................. I like my FD hehe I would like it more with a 20B,
damn somewhere around 15 people with GTS-Ts or some type just the same. One with a RB26 in it, he does curcuit but I would say around the 650-700hp range. One guy with a T51R-but no engine work so I would say 500hp or around it, he had some CAMS hehe
now 3 FDs on base
and about 4 FCs on base
no other RX7s
#43
yo dipwad..... try saying that to abel ibarra when he was going 7's with a 13b.
No "there" not, and if he is running that fast, he has a freaking 200 shot of nitruos and a T88. Along with the fact that he is replaceing his motor after every race.
Post a video and I'll believe that one!
i believe wanna be boosted just got
Hey, guess what, go suck a dick!!!
#48
question, did abel ibarra's old 13b still make 1000hp? yes it did reguardless of what kind of turbo and how many shots of nitrous, it still made 1000hp. Post a vid of what? him going 7 something?
OK, lets just try to pretend that someone got a 13B to make 1000 HP, notice I say IF! The damn thing would be lucky to make it down the track once, before it started makeing meals out of apex seals!
But I don't think there is any godly way that anyone could milk 1000 HP out of a freakin 2 rotor! And once again IF they could it would drive for about 1/2 mile!
Sounds like you just got
#50
if you read here.....
http://www.knfilters.com/news2002/prabel.htm
http://www.nhrasportcompact.com/2003.../A_Ibarra.html
http://www.nhrasportcompact.com/2001/news/073001.html
... it states that his car is (or atleast he had) a 13b when he was already going 7.something.
and in here http://www.rx7.com/racing/content/times.html it shows other cars that that have 13b that are going 7's. Therefore not only it's abel ibarra, there's a few of them.
http://www.knfilters.com/news2002/prabel.htm
http://www.nhrasportcompact.com/2003.../A_Ibarra.html
http://www.nhrasportcompact.com/2001/news/073001.html
... it states that his car is (or atleast he had) a 13b when he was already going 7.something.
and in here http://www.rx7.com/racing/content/times.html it shows other cars that that have 13b that are going 7's. Therefore not only it's abel ibarra, there's a few of them.