rotorican85

I have finally secured a date for tuner Steve Kan to be in El Paso. Gotham Racing (shop) specializes in rotary engine building and tuning but he tunes piston engines as well as rotaries. His EMS knowledge includes Microtech, Haltech, Hondata, AEM, DSM link, Motec, Electromotive, and many others. He will be in el paso the weekend of June 21 for a full day of tuning. Deposits will be 50% of whatever you decide to get done and that needs to be in to me by May 10 so i can then forward it to him as one payment with a list of cars to be done.

Dyno Time will be updated by April 3 since i am waiting for the final costs on that. I will have a cost on whether it is cheaper to do it per person, per hour, or rent the dyno for a full day, all depending on how many people want dyno tune done or street tune done. Steve's tuning rates are:





$350 - Stock turbo up to 12psi of boost (pump gas only) 1 map

$400 - aftermarket turbo up to 16psi of boost (pump gas only) 1 map

$450 - aftermarket turbo from 16psi - 25psi of boost (race gas and/or auxiliary injection only) 1 map

$600 - aftermarket turbo up to 25psi of boost (pump gas and race gas tune) 2 maps



Here is the estimated time frame allocated for each type of tuning.



stock turbo - 45 mins - 1.5 hrs

aftermarket turbo (pump gas) 1hr - 2.5 hrs

aftermarket turbo (race gas and/or auxiliary injection) 2 - 4hrs

aftermarket turbo (2 maps) 3-6 hrs



Your deposit is what reserves the slot. Nothing is set until the deposit is in. It was not easy to secure a tuning day with this guy and he comes highly recommended from many forums, manufacturers, and even other shops/tuners. you can go to you tube and see some of his work on the street or on a dyno. if you have any questions at all, just email me or call me at 915-433-5361, you can either ask for rotor85(lol) or julio!. in order to keep costs down there are only 7 slots, 3 are taken already. (2 rotaries, 1 honda)



If you have any questions and want to email him directly you can do so by going to www.gothamracing.com and clicking on his link there. If i forget to post anything that does not answer any questions you have, DO NOT hesitate to email or call me. my email is jscruff@hotmail.com