Pfc/datalogit Cold Start Mod
Guest
Posts: n/a
Settings 4, IGN vs WATER COOL; change the 60C retard of 15 to 5.
Mine starts and runs better when cold with this. With this I was also able to remove more fuel for cold starting. I think Mazda did this to help warm up the CAT faster by initially running with a lot of retard and having more gas burn in the exhaust.
Test verification for this.
I set all cells in (P1-5,N1-5) IGL to 12 and (P1-5,N1-5) IGT to 2.
With 60C set at 15 retard, I started the car.
It idled at (P4,N3) with -2IGL and -12IGT. If it was 100% accurate, it should have been -3IGL,-13IGT.
With 60C set at 5 retard, it idled at (P4,N3) with 7.7IGL and -2.3IGT.
If it was 100% accurate, it should have been 7IGL, -3IGT.
Mine starts and runs better when cold with this. With this I was also able to remove more fuel for cold starting. I think Mazda did this to help warm up the CAT faster by initially running with a lot of retard and having more gas burn in the exhaust.
Test verification for this.
I set all cells in (P1-5,N1-5) IGL to 12 and (P1-5,N1-5) IGT to 2.
With 60C set at 15 retard, I started the car.
It idled at (P4,N3) with -2IGL and -12IGT. If it was 100% accurate, it should have been -3IGL,-13IGT.
With 60C set at 5 retard, it idled at (P4,N3) with 7.7IGL and -2.3IGT.
If it was 100% accurate, it should have been 7IGL, -3IGT.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)