E6x Help
#1
I am having trouble with my E6X system and the ignition. I am installing it on my 2000 Hyundai Tiburon with OEM coils Using the Haltech Dual Ignitor Set-up.
This is a break down of what is going on. I was able to get the car to start but was only firing one of the coils. So i was only running on 2 cylinders.
Ok so on the Ignition Output - J7
(Light Green wire)
Ignition #1 (pin36 haltech)(Pin #2 on the Ignitor) Has 12 Volts when the the Key Is on with or without the Igniter pluged in
(White Black wire)
Ignition #2 (pin 35 on the haltech)(pin 7 on the ignitor) There is a Negative ground All the Time
Now I tried referesing the wiring thinking maybe one of the coils were burnt up or whatever but thats not the case it will ignite the other coil.
Do i have something wired wrong? If so what?
Is the wiring with the Haltech ECU itself wrong?
Is there a Office in the US for Haltech Repairs/Tech support?
Thanks,
Gary
This is a break down of what is going on. I was able to get the car to start but was only firing one of the coils. So i was only running on 2 cylinders.
Ok so on the Ignition Output - J7
(Light Green wire)
Ignition #1 (pin36 haltech)(Pin #2 on the Ignitor) Has 12 Volts when the the Key Is on with or without the Igniter pluged in
(White Black wire)
Ignition #2 (pin 35 on the haltech)(pin 7 on the ignitor) There is a Negative ground All the Time
Now I tried referesing the wiring thinking maybe one of the coils were burnt up or whatever but thats not the case it will ignite the other coil.
Do i have something wired wrong? If so what?
Is the wiring with the Haltech ECU itself wrong?
Is there a Office in the US for Haltech Repairs/Tech support?
Thanks,
Gary
#3
Originally Posted by kahren' date='Dec 19 2004, 12:49 PM
Yes
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)