Dyno Results
Senior Member
Joined: May 2002
Posts: 22,465
From: California
Originally Posted by t88kid' date='Sep 20 2002, 06:12 PM
Lets keep in mind that I do have a street port but Marcos Acosta has a vast experience with these motors and knows many tricks to make them fast and reliable. While many shops rely on technology, this man relies on experience, intuition and r&d. This is why I chose his shop.
List of mods: Greddy T88 Turbo, Greddy Elbow, Greddy FMIC, Ported & Polished upper and lower manifold, Street Ported Motor(a la MVA), dp, Greddy Catback, Supra intank pump, Bosch external race pump, 850 primaries, 1600 secondaries, pinned, 3mm hurley seals, Microtech Mtx8 ecu and a few extra little things. NO NOS!!!
Mario
List of mods: Greddy T88 Turbo, Greddy Elbow, Greddy FMIC, Ported & Polished upper and lower manifold, Street Ported Motor(a la MVA), dp, Greddy Catback, Supra intank pump, Bosch external race pump, 850 primaries, 1600 secondaries, pinned, 3mm hurley seals, Microtech Mtx8 ecu and a few extra little things. NO NOS!!!
Mario
mike
Thread Starter
Member
Joined: Sep 2002
Posts: 42
Opps forgot the 4msd coils and ignitions and fuel lines/rail and HKS wastegate and bov that came with the turbo kit.
There are a few more just really too much too list. Like interior enhancements, stereo, etc, etc.
There are a few more just really too much too list. Like interior enhancements, stereo, etc, etc.
Senior Member
Joined: Apr 2002
Posts: 425
From: Miami
a Greddy T88 turbo! I was thinking about putting that into my 3rd gen but wasn't sure if i should. Why the T88 man? besides more boost of course. I haven't seen too many rx7's with that turbo and always wondered why not. Is your Rx7 daily driven or is it for racing purposes only? I know marcos acosta has a rotary engine in his mx3, does he also have that T88 setup? and does he have a website? What's your 1/4 mile going to be man. I'm just very interested.
Thread Starter
Member
Joined: Sep 2002
Posts: 42
Originally Posted by blaze08' date='Sep 22 2002, 09:18 PM
a Greddy T88 turbo! I was thinking about putting that into my 3rd gen but wasn't sure if i should. Why the T88 man? besides more boost of course. I haven't seen too many rx7's with that turbo and always wondered why not. Is your Rx7 daily driven or is it for racing purposes only? I know marcos acosta has a rotary engine in his mx3, does he also have that T88 setup? and does he have a website? What's your 1/4 mile going to be man. I'm just very interested.
2. Is the rex daily driven?- Yes and no. I normally take the subway to work. But if I need to travel out of the city I'll drive my car. It is not at all a race car. No cage.
3. I know marcos acosta has a rotary engine in his mx3, does he also have that T88 setup? and does he have a website? He has a twin turbo setup. He no longer has the MX3.....it was stolen with the trailer one night after a dyno session before an event. They are working on a website.
4. What's your 1/4 mile going to be man? I'm hoping high 10's on slicks but I don't know whether the stock driveline will hold with slicks.
Mario
Senior Member
Joined: Sep 2002
Posts: 657
From: Alexandria Va
Drives shafts will hold for a while and the diff too. Just make sure you run slicks and dont use poppy street tires. Never dump the clutch on street tires dude.
start at 13psi or so on slicks and work your way down. IMO
just my .02 cents
-Rikki
start at 13psi or so on slicks and work your way down. IMO
just my .02 cents
-Rikki
