3rd Generation Specific Talk about 3rd gen RX-7's here.

Removel Of Instrument Panel From Dash?

Old Mar 13, 2004 | 05:34 PM
  #1  
Mazdabation's Avatar
Thread Starter
Senior Member
 
Joined: Sep 2002
Posts: 1,211
From: Due to global Warming, the new hot spot.........Canada
Red face

I went through the common sites for how too's but i didnt really find what i am looking for. I know most men are not supposed to read instructions and just go straight at the work at hand. But i on the other hand am a dumb ***.....no i just like to do things properly and dont like breaking tabs, soooooo...............

I need a how to on getting my instrument cluster out. So far i have just take the steering wheel hub/shroud off and pull on the hood, but that doesnt seem right to me. Dont I have to take the A/C surround apart first?

Shawn
Old Mar 13, 2004 | 06:30 PM
  #2  
TyresmokinRx7's Avatar
Senior Member
 
Joined: Apr 2003
Posts: 875
From: Canberra Australia
Default

Good to see i'm not the only one needing to remove it.
Old Mar 13, 2004 | 06:32 PM
  #3  
yonner's Avatar
Senior Member
 
Joined: Dec 2003
Posts: 472
From: scotland uk
Default

lol i will be removing mines enxt moth to replace the dial with mph
Old Mar 14, 2004 | 01:32 PM
  #4  
Silver Ninety Three's Avatar
Senior Member
 
Joined: Oct 2001
Posts: 1,675
From: Clifton, NJ
Default

service manual tells you where all the screws are
Old Mar 14, 2004 | 03:07 PM
  #5  
Fd3BOOST's Avatar
Senior Member
 
Joined: Jun 2002
Posts: 9,725
From: La Plata, Maryland
Default

You need to remove the steering column shrouds. There is one screw on teh left side where the vent is, under that panel. You need to remove the AC panel, that hides ones screw that is to the left. Then disconnect six connectors. Then tug it firmly straight back. It is clipped in with three slide in connectors toward the front of the cluster. Its really pretty easy once you are familiar with the position of all teh connectors.
Old Mar 14, 2004 | 03:14 PM
  #6  
Mazdabation's Avatar
Thread Starter
Senior Member
 
Joined: Sep 2002
Posts: 1,211
From: Due to global Warming, the new hot spot.........Canada
Default

AHHHHH so you do have to remove the A/C pannel. In turn means that you have to also take out the center consol cause the two are attached at the radio.

So when removing the A/C section will all the ***** and dials just come out with it?
Old Mar 14, 2004 | 03:17 PM
  #7  
Sinful7's Avatar
Senior Member
 
Joined: Aug 2002
Posts: 4,985
From: Denver, CO
Default

NO, the AC panel screw is UNDER the gauge hood!!!
Old Mar 14, 2004 | 03:17 PM
  #8  
turbovr6's Avatar
Senior Member
 
Joined: Nov 2001
Posts: 4,981
From: NJ
Default

yes all the a/c controls will come out still attached to the panel. you just have to unplug the wires
Old Mar 14, 2004 | 03:20 PM
  #9  
Sinful7's Avatar
Senior Member
 
Joined: Aug 2002
Posts: 4,985
From: Denver, CO
Default

Just start pulling the trim pieces - the ones that you'll need out of the way are the steering column surround, the dash door vent (where it goes to the door) and the dash under trim.



All the scres for the hood will be exposed at that point, then it's just a matter of grasping the hood at the 10 and 2 o'clock position, and pulling firmly straight back. It'll offer some resistance, but it should come out.
Old Mar 14, 2004 | 03:21 PM
  #10  
Mazdabation's Avatar
Thread Starter
Senior Member
 
Joined: Sep 2002
Posts: 1,211
From: Due to global Warming, the new hot spot.........Canada
Default

HAHA ok...thanks man. So I can leave the A/C panel alone then.....looks like me and tiresmoken have a job this weekend

Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:03 AM.