NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   3rd Generation Specific (https://www.nopistons.com/3rd-generation-specific-18/)
-   -   Question about boost pattern for NS turbos. (https://www.nopistons.com/3rd-generation-specific-18/question-about-boost-pattern-ns-turbos-74975/)

BOOSTN 12-06-2010 06:11 PM

Hi Guys,



Hoping someone migt have an answer to this. Recently had someone do the poor mans non seq conversion. have a full exhaust, profec b spec2, intake and fm cooler. The car has no boost under 3000rpm and at 3 it starts to climb. Is this normal for the NS setup?



It doesn't feel like any lag though. It feels restricted and like a switch at 3k it climbs. Would this have something to do with the charge control valve?



I'll be grateful for any suggestions.



NV

thatpoorguy 12-06-2010 09:43 PM

Sounds like the valve is stuck wide open. I bet once the boost climbs it jumps up doesn't it

BOOSTN 12-07-2010 08:16 PM


Originally Posted by thatpoorguy (Post 844821)
Sounds like the valve is stuck wide open. I bet once the boost climbs it jumps up doesn't it



Thats how it feels. 0 - 3000rpm I get 0 - 1.5 psi then from 3000 to 4500 it climbs to 12psi. Isn't the valve supposed to stay open though?



Guess I should pull off the pipe and find out https://www.nopistons.com/forums/pub...IR#>/smile.gif

thatpoorguy 12-08-2010 05:53 AM

No, normally a vacuum actuated valve opens it at about 3500 I believe? Having that wide open isn't allowing the primary turbo to spool but the secondary is spoiling up faster and has higher pressure

GreyGT-C 12-08-2010 12:20 PM

on an NS car.. the valves are removed, if done properly (ie, not the poorman's mod) Boost should start building around 2500-3500, depending on what mods you have on the car and gradually build to whatever your Wg is set up for. Take the turbos off and go ahead and do the real mod on it, it'll work ALOT better, AND you need to port the wastegate for it to be able to control boost properly.



Do you have the instructions for doing the real mod to it? It was 10 years ago when i did mine so i don't completely remember all the details on it but i can find my printouts on it if you need them.

BOOSTN 12-09-2010 11:30 PM

Thanks for the feedback lads. I'm gonna stop fooling around with the stock twins I think.



Placing an order for a t04z this month along with a whole buch of performance goodies.



NV

thatpoorguy 12-10-2010 11:20 AM

Keep a tune in mind with your budget or else you'll end up like me lol

BOOSTN 12-13-2010 06:50 PM


Originally Posted by thatpoorguy (Post 844992)
Keep a tune in mind with your budget or else you'll end up like me lol





Will do https://www.nopistons.com/forums/pub...IR#>/smile.gif Already looked at additional costs. My mechanic will be doing all the fab and tuning.



Did you run into issues with your tune?

thatpoorguy 12-13-2010 07:15 PM

Besides not being able to afford the final one not much lol

BOOSTN 12-13-2010 08:11 PM


Originally Posted by thatpoorguy (Post 845073)
Besides not being able to afford the final one not much lol





Oh right LOL.



Hope you got it sorted. https://www.nopistons.com/forums/pub...IR#>/smile.gif This is actually my first RE car so I'm learning something new everyday. Luckily, I know where to turn to for help when I need it.



NV


All times are GMT -5. The time now is 04:41 AM.


© 2024 MH Sub I, LLC dba Internet Brands