Only one intake runner coated with oil. Smoking on high revs only
#1
Recently got my first FD. First thing I noticed it smokes (light blue)if I rev it high at while the car is at standstill . However, at low revs it does not somke or very little.
I happened to pull off the UIM and found that the intake runner closest to the fire wall was very oily. The three others were dry. Do you think this assiciated with the smoking problem?
If the the rear rotor was the source of the oil should not both runners leading to the rotor be oily?
I already removed the PCV hose to the UIM.
Please assist in diagnosing the problem
I happened to pull off the UIM and found that the intake runner closest to the fire wall was very oily. The three others were dry. Do you think this assiciated with the smoking problem?
If the the rear rotor was the source of the oil should not both runners leading to the rotor be oily?
I already removed the PCV hose to the UIM.
Please assist in diagnosing the problem
Thread
Thread Starter
Forum
Replies
Last Post
Heath
Rotary Engine Building, Porting & Swaps
8
11-26-2008 02:15 AM
Node
2nd Generation Specific
16
12-11-2006 05:38 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)