RX7 DUDE

Just to let you guys know, I pulled the cradle down, almost blew my eyeball out trying to loosen the cradle bolts but they did come loose. I spent 2 days cleaning the bottom of the block for a clean seal. I decided to buy a new oil pan from Mazda for $80 . I used a Mazda gasket with high temp on both sides of the gasket. I put a good amount on the gasket but not so much that it would squirt out the sides and into the oil pan. I did have 3 oil pan bolts that broke , some idiot cranked them into the block hard so I had to tap and rethread. Finished the job on day 4 and NO LEAKS!! I appreacite everyone's help. It took around 3 hours to drop cradle, probably 1 hour to reinstall. I did have troble aligning the motor mounts back into the cradle holes but it wasent too bad. I put most of my time in cleaning the motor so the gasket and sealer worked properly. Anyone have any ??? feel free to e-mail me.



93 RX7 19icnh Konig wheels, 99 chin, Veilside C1 Greddy SP exh, Downpipe

98 Corvette Conv BBS LM wheels

03 Eclipse GT

84 Fiero INDY 500 Pace Car 4spd

84 Fiero INDY 500 Pace Car 4spd

93 R1

Usually more silicone sealant is worst then none at all. The more you use the better chance it will leak.