Non Starting all of a sudden! pants well and truly browned
Senior Member
Joined: Dec 2003
Posts: 791
From: Mid-West
Adhesive strips of velcro work pretty good for securing the PFC without using screws.
I also second checking the crank-angle sensors. Didn't think of that at first and the wires do tend to get brittle. Careful though, because they are shielded.
I also second checking the crank-angle sensors. Didn't think of that at first and the wires do tend to get brittle. Careful though, because they are shielded.
Thread Starter
Junior Member
Joined: Jul 2010
Posts: 7
From: Wrexham
Ok thats next on the list then, thanks guys
Thread Starter
Junior Member
Joined: Jul 2010
Posts: 7
From: Wrexham
Could I ask someone for a moment of their time to tell me where the crank sensor is located, preferably by showing it on a picture? I need help locating it, I have googled for it, got the multimeter ready and I know what resistance level the sensor should read just need to know where it is!
Many Thanks
Many Thanks
Senior Member
Joined: Dec 2003
Posts: 791
From: Mid-West
No problem. You can download the Factory Service Manual from this site. Look under DOCUMENTS: http://www.wrex-racing.com/web/fd/info.htm
Look on page F-166. The FSM refers to it as the "Crankshaft Position Sensor". There are pictures and instructions for removal and testing.
This is the best picture I could come up with. One of the two sensors is a little hard to pick out, but they're both there along with the trigger wheel. They're circled in blue......
Careful with the wires, they are shielded and have a reputation for getting fragile with age.
Look on page F-166. The FSM refers to it as the "Crankshaft Position Sensor". There are pictures and instructions for removal and testing.
This is the best picture I could come up with. One of the two sensors is a little hard to pick out, but they're both there along with the trigger wheel. They're circled in blue......
Careful with the wires, they are shielded and have a reputation for getting fragile with age.
Thread Starter
Junior Member
Joined: Jul 2010
Posts: 7
From: Wrexham
No problem. You can download the Factory Service Manual from this site. Look under DOCUMENTS: http://www.wrex-raci...web/fd/info.htm
Look on page F-166. The FSM refers to it as the "Crankshaft Position Sensor". There are pictures and instructions for removal and testing.
This is the best picture I could come up with. One of the two sensors is a little hard to pick out, but they're both there along with the trigger wheel. They're circled in blue......
Careful with the wires, they are shielded and have a reputation for getting fragile with age.
Look on page F-166. The FSM refers to it as the "Crankshaft Position Sensor". There are pictures and instructions for removal and testing.
This is the best picture I could come up with. One of the two sensors is a little hard to pick out, but they're both there along with the trigger wheel. They're circled in blue......
Careful with the wires, they are shielded and have a reputation for getting fragile with age.
You sir are a Champion!
Thread
Thread Starter
Forum
Replies
Last Post
FC_BOY
2nd Generation Specific
2
Jan 12, 2008 06:34 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)