I'm working on building my rx7 up for autocrossing, still looking for a few parts but have a good bit already assembled. the list as of right now



Engine:

Banzai Racing rebuild w/3mm seals

street port

gt35r single conversion

850 primaries 1600 secondaries

jacobs ignition

apexi power fc

polyurethane bushings



drivetrain:

ACT HD clutch

97 JDM trans rebuilt

4.30 final drive

KAAZ locked diff (noisy SOB)

short throw shifter



chassis/suspension:

greddy front tower bar

tokico shocks

racing beat springs

rotary performance drag launch kit (solid bushing toe rods, trailing arms, and diff bushings in rear)

6 point roll cage pending

mazdaspeed PPF



that's all i can remember off the top of my head. any suggestions for parts would be awesome, pictures are in my garage

 

 

You might want to consider a J&S safeguard or Vampire knock control system. These systems will help prevent detination at high boost and RPM. It is small price to pay to protect your investment. Here is a link. The owner's name is John. Let him know you heard about it from Jeff.



J&S Electronics SafeGuard Indivdual Cylinder Knock Control

 

jeff i'm guessing you got the one channel/two channel combo controller? will that hook up to or replace the jacobs ignition unit i already have? thanks for the suggestion

 

Nice setup so far.. I would go with a water/alcohol injection kit, ditch your current injector setup, move back to stock primaries and run the ID2000 secondaries..

Injector Dynamics ID2000 - Turblown Performance



You don't have an intercooler listed in your mods, but your picture looks like a FMIC..?

 

i'm wanting to do some SCCA road racing and they don't allow meth injection i'll look into the setup you posted after work, it's blocked by work's filters. yes it has a massive FMIC, but i can't find any markings on it as to who makes it. here's a couple decent pics of it. it's as tall and wider than the radiator, and about twice as thick :P

 

after rereading through the rulebook, i can do water injection but it doesn't specify for meth injection. being that it's a fuel I'll either need to have the tank in the engine bay (yay fire hazard!!) or fabricate a firewall between the seats and the back hatch, which isn't hard but a little extra weight added up high :P I'll look into it and see what i can do and look into your fuel system tonight.

 

Just do water injection then...

 

got any recent pics of the engine bay?

 

my avatar is the engine as it is right now, they're waiting on the trans to be done being rebuilt. Banzai (banzai-racing.com) is rebuilding it and i asked them to have the local shop do the trans too. the shop said it would be 2300 in parts alone (destroyed synchros) so i scored a 97 jdm off of ebay for 150 and the rebuild will be just shy of a grand. once the trans is done it'll all be installed and banzai will send me the pics. i'm in the sandbox so it's nice that they keep me updated with a webpage soley devoted to my car's build