JDM Swap, Runs, but no power, and 2600rpm idle
05-30-2009, 01:20 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2009
Posts: 8
So I got the car running now, but it has almost no power , seems to be running extremely rich, wont make boost, and idles ablut 25-2600rpm. These symptoms ring a bell with anybody? I tried both the PFC and a JDM Stock ECU, with little difference.
05-30-2009, 06:37 PM
#3
Junior Member
Thread Starter
Join Date: Apr 2009
Posts: 8
Map sensor should be fine, I just replaced it about 2k miles before I blew the old motor, visible connections are fine, motor pulls about 15psi vacuum, so vacuum system should be fine.... Running rich may have just been the idle screw, which has been adjusted. Seems to help, but didn't get a chance to drive it yet. Also, my gauges aren't working, but that may be a side effect of installing the JDM cluster.
Thread
Thread Starter
Forum
Replies
Last Post
cwsttu
2nd Generation Specific
2
03-24-2004 06:33 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)