Identifying connectors
#1
Browsed through a number of sites and forums and came up short.
I'd use my other FD as a reference but its currently in another location...shopmanual as well
Completed the hose replacement under the UIM but lost my place for
some of the wiring connectors by the firewall. Essentially there
are 5 connectors closest to the firewall. 1 of which is for the O2
(already placed) 2 others with yellow and orange color codes (both
having black housings, 1 white housing and the other (grey housing)
that without doubt connects to the throttle body. I need to locate
placement of the 2 black and 1 white connectors.
Cheap stickers used for labeling fell off from the humidity. Should
use nail polish next time. Appreciate any info anyone can provide
:sigh:
I'd use my other FD as a reference but its currently in another location...shopmanual as well
Completed the hose replacement under the UIM but lost my place for
some of the wiring connectors by the firewall. Essentially there
are 5 connectors closest to the firewall. 1 of which is for the O2
(already placed) 2 others with yellow and orange color codes (both
having black housings, 1 white housing and the other (grey housing)
that without doubt connects to the throttle body. I need to locate
placement of the 2 black and 1 white connectors.
Cheap stickers used for labeling fell off from the humidity. Should
use nail polish next time. Appreciate any info anyone can provide
:sigh:
#2
nevermind...
decided to eat the 70 mile drive and pick up my manual at the other location...
in case anyone followed this..
the connectors in question are from the emission harness
----the black connector with the orange code is for the AWS
----the black connector with the yellow code is for the Intake temp
----the white connector is for the idle speed control
decided to eat the 70 mile drive and pick up my manual at the other location...
in case anyone followed this..
the connectors in question are from the emission harness
----the black connector with the orange code is for the AWS
----the black connector with the yellow code is for the Intake temp
----the white connector is for the idle speed control
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)