Help Me Please!
#1
I have a 94 FD and recently I brought it to my local shop to spray two interior panels while I went on vacation. Well I get back and the car will not start. I checked the voltage and charged the batteries...nothing. The car kinda turned over a little but then droped. Now it just is nothing....just cranking...any ideas?????
#6
when this happend to me one of the cells in the battery was dead.... so if u checked it with a voltometer it looked good but had NO crankin power.....
If you are gonna pull the plugs, you shouldnt HAVE to pull the fuse (i didnt).... Just pull the plugs and keep the wires outta the way (as they will arc).... Crank it... listen to the cool whooosh whooosh whooosh ..... Then let it sit with the plugs out for another 15 min.... come back, put a little oil or ATF in the plug holes and put the plugs back in (preferrably clean or new ones)....
Should start right back up....
If you are gonna pull the plugs, you shouldnt HAVE to pull the fuse (i didnt).... Just pull the plugs and keep the wires outta the way (as they will arc).... Crank it... listen to the cool whooosh whooosh whooosh ..... Then let it sit with the plugs out for another 15 min.... come back, put a little oil or ATF in the plug holes and put the plugs back in (preferrably clean or new ones)....
Should start right back up....
#10
Originally Posted by Ben93rx7' date='May 4 2003, 06:02 PM
when this happend to me one of the cells in the battery was dead.... so if u checked it with a voltometer it looked good but had NO crankin power.....
If you are gonna pull the plugs, you shouldnt HAVE to pull the fuse (i didnt).... Just pull the plugs and keep the wires outta the way (as they will arc).... Crank it... listen to the cool whooosh whooosh whooosh ..... Then let it sit with the plugs out for another 15 min.... come back, put a little oil or ATF in the plug holes and put the plugs back in (preferrably clean or new ones)....
Should start right back up....
If you are gonna pull the plugs, you shouldnt HAVE to pull the fuse (i didnt).... Just pull the plugs and keep the wires outta the way (as they will arc).... Crank it... listen to the cool whooosh whooosh whooosh ..... Then let it sit with the plugs out for another 15 min.... come back, put a little oil or ATF in the plug holes and put the plugs back in (preferrably clean or new ones)....
Should start right back up....
Thread
Thread Starter
Forum
Replies
Last Post
ChainSawOnSteroids
Rotary Engine Building, Porting & Swaps
8
02-21-2007 10:45 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)