bridge it you sissy

 

I fixed my wiring harness problem. Also made the new harness REALLY clean...took out all the crap I didn't need.

 

A/F ratio in the 13s under boost and the tuner knows what they are doing

 

You'll bridge port your engine but you won't drag race your car. Sissy huh

 

Who me?



Who said I don't drag race?

 

Yea you! Everytime I read something about possible drag racing at an event you say you don't want to race "just incase you break something". I have never once seen you talk about racing day or post a time slip. So again, why bother getting a bridge port if you don't race the car? Wouldn't a street port be sufficient for the type of driving you do?

 

If that is your map, then you need to send me a datalog. What were you boosting? You have some nasty negative split going on. This is your split map:

 

was running off the wastegate spring, the .8 to 1.1 spring.

 

You got me all wrong man. I've been many times. Just not 2 1/2 hours away from home. Best I've ever run was 12.9 at 111. That was about 1 1/2 years ago though.



You just wait

 

Looks like you were using P16 and below since P17 is 1.8 kilos and P20 is 3 kilos!





On a side note, why didn't you turn your fan settings down? That way your water temps sit much lower. I have mine set at 88C.