Make sure your car has NOT BEEN RUNNING!!!!! Mine can boil water from 5 feet away.

 

my muffler used to slide on the rubber things and on hard left turns it would hit the body, it was more like a banging though



mike

 

Mine happens, when i break, go over bumps, and between shifts. I have tightend that nut that holds the shock it can't go any further. I don't know what else to do, cause it only happens when the car is hot.

 

Could be a toe link too. Jack each corner one at a time and grab the wheel at 9 o'clock and 3 o'clock try to twist it back and forth. There should be no movement. I think the best bet is just to do all the bushings at once. Our cars are getting old and ther bushings wear.

 

I hear that a lot... I guess it's something close to the exhaust that gets loose when hot? I dunno...

 

The problem is the rear bushings I had a shop replace mine and the clunk stop. they did it for free for me and they put used ones on. Now I need to do them again. Is that link that shows how to do this for the front end or the rear end? The bushings are like $40 a piece I think. Anymore advice anyone?

 

none??

 

mine does the same, i have a bad hub bearing on the right rear and need new shocks it doesnt sound like its a major problem for you though besides sound. just turn up the radio

 

most likely the problem is the pillow ***** for the rear. there are 6 total, and they go for like 42 dollars and some change each at Malloy Mazda. A local mazda dealership will charge over 60 dollars each.

 

guys....if you need bushings jim labreck (sp?) or jimlab of the other forum will make another batch....if we can get 12 people together.



his bushings are firmer then stock. glass bead bushings. The rx7club isnt working for me right now. when its back up ill get the link for yall.