alright the oil coolers on a fc are located in the front near the bumper. oil coolers on a fd?

 

I would find a set of used turbos instead of rebuilds. Most rebuilds don't seem to hold up very well. Definately go non sequential. Replace all water hoses/thermostat.



Don't worry about pullies or any of that dumb ****. Save for a computer. You will get alot more out of a computer then some $250 set of pullies. Just a pettit or M2 ecu would work fine and can be found for $250-500 used.



Don't buy a SAFC. Its a waste of money.

 

JT has used FD turbos with less than 25,000 on them for 525.95 I think that's the shipped price.



As for computer, Justin is right. Any computer is better than none, and worth the bucks in performance gains! My PMS box is everything I need for less than $500.

 

oil cooler i know that one. woo hoo.....





its in front of the car. look in the opening under the drivers headlights.

 

On both sides if it's an R1.

 

Go ahead and replace the thermostat and Radiator cap when you replace the radiator. I would recomend replacing all the coolant hoses too.