3rd Generation Specific Talk about 3rd gen RX-7's here.

Boost Problem With Twins

Thread Tools
 
Search this Thread
 
Old 05-11-2004, 12:38 AM
  #1  
Member
Thread Starter
 
Skylinecar1982's Avatar
 
Join Date: May 2003
Posts: 52
Default

I have a 94 with stock twins. About two weeks ago I started hearing a scraping noise when engine is under a load. I believe the problem is with the secondary turbo because when accelerating I hear the scraping the boost goes down to 9psi(normally runs at 14psi) Sometimes is scraps and no power and somtimes it doesn't and then is power and sometimes it doens't scrap and still no power. Oh is 14psi normal conditions. I have a downpipe intake exhaust(still have main cat),bigger intercooler and a hks bov. It always smells really rich at idle but the a/f meter says 13.6. Normal? Could the cat be clogged adding back pressure to the turbo and cause one to fail??



Anyone have any ideas.





I plan on going single but for now may rebuilt twins so car will run right if that is the problem.



Thanks For your Help
Skylinecar1982 is offline  
Old 05-11-2004, 12:41 AM
  #2  
Senior Member
 
FikseRxSeven's Avatar
 
Join Date: Jan 2003
Location: union, new jersey
Posts: 8,079
Default

at what rpm do you hear this scrape? is it a shrill metal to metal sound? have you tried lowering the boost? and if you have do you still hear it?



go single and forget about this crap
FikseRxSeven is offline  
Old 05-11-2004, 12:43 AM
  #3  
Member
Thread Starter
 
Skylinecar1982's Avatar
 
Join Date: May 2003
Posts: 52
Default

from 4k up and I can't lower boost I have no controller.
Skylinecar1982 is offline  
Old 05-11-2004, 12:46 AM
  #4  
Senior Member
 
FikseRxSeven's Avatar
 
Join Date: Jan 2003
Location: union, new jersey
Posts: 8,079
Default

hmmm how are you boosting up to 14 on a normal basis? you know something is wrong with your turbo control system cuz its only supposed to boost up to 10lbs (10-8-10)
FikseRxSeven is offline  
Old 05-11-2004, 12:48 AM
  #5  
Member
Thread Starter
 
Skylinecar1982's Avatar
 
Join Date: May 2003
Posts: 52
Default

I have to definately chat that bout sounds like it's boosting properly with 9-10psi but can it still run to 10psi on one turbo and still have a lack of power???
Skylinecar1982 is offline  
Old 05-11-2004, 12:49 AM
  #6  
Member
Thread Starter
 
Skylinecar1982's Avatar
 
Join Date: May 2003
Posts: 52
Default

oh definately a metal scraping sound like a tin can scarping thick metal
Skylinecar1982 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
slissek
Performance Mods
0
05-23-2012 07:18 PM
heidihi
3rd Generation Specific
23
07-26-2009 09:35 PM
neil_jdmr
3rd Generation Specific
0
06-19-2008 05:16 PM
EZFD
3rd Generation Specific
7
08-11-2005 11:27 PM
Danno
3rd Generation Specific
8
10-20-2003 05:11 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Boost Problem With Twins



All times are GMT -5. The time now is 11:51 AM.