3rd Generation Specific Talk about 3rd gen RX-7's here.

Boost Problem

Old Mar 14, 2004 | 07:48 PM
  #1  
TURBOX2's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2002
Posts: 389
From: VA
Default

Hey guys....i am having some boost problems and i figured i would inquire about some possible solutions. My boost is cuting out at higher rpm's. In first gear at about 6500 rpm's the car completely boggs down and the boost dies off and it almost sounds like a backfiring sound from the exhaust. The boost gauge is showing a normal boost pattern at the change over and its not spiking. In second gear the same thing happens except it at a lower rpm and it continues to rev but there is just no boost. I have looked at all the vacuum lines to make sure none of the lines are kinked or off. Everything looks to be ok. I have no clue what is going on and this problem just came out of nowhere. Oh yeah and i am still on the stock sequential setup. Any input would be helpful...



thanks



--Nick
Old Mar 14, 2004 | 10:22 PM
  #2  
TURBOX2's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2002
Posts: 389
From: VA
Default

anyone?
Old Mar 15, 2004 | 10:31 PM
  #3  
TURBOX2's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2002
Posts: 389
From: VA
Default

ok...i actually think this is more of a fuel problem than a boost problem now....tonight i tried to redline the cara couple times in first. It pulled fine and boost was perfect except around 7k the car would lose power and backfire a lot. Any ideas?
Old Mar 15, 2004 | 10:47 PM
  #4  
FikseRxSeven's Avatar
Senior Member
 
Joined: Jan 2003
Posts: 8,079
From: union, new jersey
Default

when was the last time you changed your spark plugs?
Old Mar 15, 2004 | 10:52 PM
  #5  
TURBOX2's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2002
Posts: 389
From: VA
Default

actually its been a little while...guess i will do that tom....anything alse?
Old Mar 15, 2004 | 10:53 PM
  #6  
FikseRxSeven's Avatar
Senior Member
 
Joined: Jan 2003
Posts: 8,079
From: union, new jersey
Default

check your sparkplug wires too, make sure that they are not melted......or any corrotion inside the sleave.
Old Mar 15, 2004 | 11:11 PM
  #7  
g_dripht-alex's Avatar
Senior Member
 
Joined: Oct 2003
Posts: 419
From: east meadow, new york
Default

sparkplugs/wires/fuel pump/fuel filter
Old Mar 15, 2004 | 11:31 PM
  #8  
TURBOX2's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2002
Posts: 389
From: VA
Default

Thanks guys...i will check/replace all of the above suggestions tom and let you know if it helped.



--Nick
Old Mar 18, 2004 | 01:22 PM
  #9  
b@@sted_fd's Avatar
Senior Member
 
Joined: Mar 2004
Posts: 252
From: Calgary, Canada
Default

i have that exact same problem right now... new ported engine, new 99 efini turbo's (sequential), new hks plugs, new plug wires, new highflow fuelpump, new fuel filter and still happening. tried to tune it out with the power fc but no luck so i bought a GReddy profec b spec 2 boost controller. havent installed it yet but we'll see afterwards...
Old Mar 23, 2004 | 07:25 AM
  #10  
TII777's Avatar
Senior Member
 
Joined: Jul 2003
Posts: 392
From: MN
Default

HAve you checked the clips on your waste gate. Cheap part --- big problem.

Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:57 AM.